heat

So Peekster needed a new sprocket for his recently acquired "Digger" bike Apparently they are not readily available in the proper mounting configuration and pitch that he wanted. Either that or it is available but he's figured out a cheaper way to do it :glare: I dunno...I just do what he...

this is coming off an old baja heat with chrome looking headlight. Is complete, but not sure if the bulb is good on it. Yellow haze on the lense and could use a good polish. Asking $20 plus shipping. Ships from Flower Mound, TX 75022 and will ship via USPS standard shipping. Paypal only.

I converted a Baja heat into a 3 wheeler and i saw there having a sale on the predator 8hp at harbor and freight. My main question is do you think that engine would fit in the frame of that bike?

Hi everyone. I usually hang out at diygokarts.com, but I have two mini bikes and wanted to get some advice about the baja heat gas tank set up. So basically I did THIS to an Old Briggs 5 hp flat head and i am happy with the results so far: (couldnt really put it in the clone or briggs section...

I ordered an inline fuel filter to use on my Greyhound 6.5, my question is will the heat from the engine cause it to melt if I place it in the cramped space right next to the engine in between the fuel tank and carburetor?

I just need the saddle(not sure what you call it but the part of the lever clamp pictured that I broke when I overtightened it) or I will take another of the same lever if you have an old one. I have 7/8" brake levers but like the look and feel of that one. Just tell me how much with shipping...

Good morning. I hope this is the correct section for a "Heat" question. I am trying to locate two new fork tubes for my Baja heat. I have seen some for sale but they say they are for the MB200. I believe mine is the MB165 due to the metal fenders and metal tank. Would there be another place I...

Whats the best way to set idle? Do i need to move the springs in different positions and turn idle screw until it idles smooth? At first it was running but 'pulsing'. Now its a lot smoother but still high. Thanks in advance

Hi I am curious about powder coat in relation to pressing a bearing using heat. On the fork legs, I have to press the oilite bearing into the top of the leg. I was going to use the method of sticking the fork leg (after powder coating) into the oven and putting the bearing in the freezer (or...

Hello all. Has anyone here converted or seen someone convert the baja heat/warrior mini bike to a gx 390 w/40 series torque converter? I have restored a few go karts and swapped out their engines for GX 390's. I have had to fab up custom motor mounts for this to work. I am hoping to do...

Baja heat 6.5hp no governor and won't start please help Ok so I've had this baja heat for about 2-3years it's been running good and I decided to make it faster right before It started right up and then I took out the governor and put everything back on and now it won't start up it has spark and...

How do you heat your home? Just a thought I had since winter is on its way. this is the first year I am going to heat primarily with wood. My last house was gas and I loved it. But gas isnt offered in where I am now. Propane, oil, electric or wood. I have an oil furnace and wood...

I've got this motor thats driving me crazy. Predator 6.5 w header, hiflow intake, #92 main jet. This predator will run and scream like a champ for about 30 minutes, then it sputters and loses power, until it cools off. I have that exact combination on 2 other motor and never had a...

will the clutch from a baja heat fit on a hf 212 predator? are the crankshafts the same size?:shrug:

I have a Baja Heat 196cc (bought it used) it ran fine for the first week or so (actually it still runs) but 2 things have happened since. 1. We are experiencing some violent whip back when trying to pull start, rips the cord out of your hand (almost rips your fingers off) what causes this...

Hello, I own several Baja mini bikes and am always needing parts. Currently I need a front fork assembly for a warrior, or equal such as heat or mini Baja. So if you have a non running Baja, let me know, I sure could put the parts to good use, thanks.. My name is Kier Phone: 609.685.4824...

As most of you can tell, I am new to this forum. I just bought a used Baja Heat off of a guy and decided to mod it. First i purchased a Knockoff TAV2. I installed the little sucker over the weekend, but i could tell absolutely no difference in it other than less torque. I was under the...

Do the old blue HF clone engines have the mounts for a lighting coil? I have a junk motor I could take the lighting off from.

What size are the wheel bearings for the big baja bikes?Where can i find them? Thanks..

(Harley Baja Mini Bike...L@@k... So Cool !!!!!)