hs50

Looking for a engine for my bonanza chopper. Would like a hs40 or hs50 tecumseh lighted or not. But lighted is nice :smile: would like it complete and in nice running condition ready to go. Let me know what you have. Thanks Ryan

For sale is a NOS Tecumseh HS50 short-block. This shortblock comes with the original box, installation instructions, and gasket/decal kit. It is loaded with new block, piston assembly, rod, cam, valves, springs, and oil seals but no crankshaft. This would make a great replacement for your old...

OK, here is what I've got: 1) HS50 - Has good compression and spark. Just needs a spark plug, carb, intake, and exhaust to run. Includes the tank, clutch and chain guard shown in pics, but DOES NOT INCLUDE FRAME. $50 + shipping 2) Bonanza Sprocket - Has been powder coated in...

I have a 69 rupp with a 3 1/2hp want something bigger thanks Taz

I can't bring myself to put the Briggs engine on the Eliminator so I'm searching now for a nice HS40 or 50. I'd prefer black and I'd prefer it to be in very nice cosmetic condition. I have some things for trade or cash or partial/cash/trade...whatever works. Let me know what you have.

I don't believe it, it started on the third pull :thumbsup: http://s677.photobucket.com/user/cheesenip3/media/HS50Running.mp4.html

Hi all, I've been looking at getting a new carb for my HS50 as the one that came with it is a diaphram type meant for smaller engines, and won't run quite right. I've been looking over some of the carbs on amazon.com, but not really sure what would be right. I've found these two and they...

just finished a total rebuild of an HS50. it got new gaskets, rings, piston, seals, breather, rod, wrist pin, magneto coil, etc., etc.. it was torn down totally and then reassembled and torqued according to the manual. i didn't paint it yet, although i soda blasted the block and head...

Guys, here's a Tecumseh HS50 that I rebuilt with the thought of using it on a project bike for my father-in-law. I have come to the conclusion that lights are not needed for his bike, so I'll offer this engine up to the OldMiniBikes community. Engine is fresh with new rings, rod, seals, gaskets, points...

I have a very good condition Tecumseh HS50 block and side cover. I bought this off eBay and wound up not using it. The cylinder looks great with no ridge or scoring. Would like to get $30.00 plus $15.00 for the shipping. I also have a new, aftermarket rod I bought from OldMiniBikes ...will sell for...

i hand cut a gasket and zinc plated the points cover for my HS50 project today. Plating is easy and the results are pretty good using roach killer, artificial sweetener, and any metallic zinc you might have laying around :thumbsup: life is good!

Looking for a metal small block Tecumseh tank. Front mount, square style. No dents. PM me with details.

if anyone is looking for a nice smallblock hs50 there is one on ebay for 25 bucks with 6 hours to go and no bids. 30 bucks shipping. I was going to bid on it but I have to many clones and want to stick with them as they are easier to get power out of.

Where can I get an oil seal for an HS50 with a ball bearing side cover? Engine # is: HS50-67124D. Most of the illustrated parts lists I have found don't show it.

Let me know if you have one to sell...Thank you.

Iv got a HS50 from an ariens snowblower looks to be in good shape i looked inside the cylender is very good. Has 3/4" shaft and a reverse gear cam which can easily be cut off. Carb inside looks good I have not had it running It doesnt have spark. $75. shipped also have the starter for it for...

perfect running no knock or smoke. can be converted to a single easily. could go for a bowl gasket. 120 shipped

Looking for a slanted intake manifold for a Tecumseh HS50 (5hp). I can find the ones for the HS40, but they don't fit the 5hp. The HS50 has a different shaped intake port. If you have one, let me know. Thanks, Bill

I put in a new kit and the high speed jet leaks. Any tricks on sealing this? It leaks around the threads.

Whats the torque spec in ft-lbs for HS50 head bolts?