kill

Hello, I have the Tecumseh HS50, and I can't seem to locate where my kill switch plugs in on the engine :shrug: This is my first time installing one, and would appreciate any assistance :thumbsup:

can the original kill switch on a db30 be hooked up on a new hf predator motor? thanks

Hey all !! I am in the process of building my son a mini bike for Xmas. So I bought a 212cc Harbor Freight "Predator" engine. The engine has an on/off switch. My question is...Can you hook up an additional kill switch to it ? I want him to be able to kill it with his thumb as opposed to reaching...

I have a 5hp IC briggs. When I pull the cord about every other time the cord wants to pull back into the recoil. The force is tremendous and almost every time nearly brakes my hand or my shoulder. I can start it but it takes a lot of pulls and bruised fingers to get it done. I'm curious at...

this is my first centrifugal clutch. its a hilliard extreme duty clutch 41 chain 11t. jackshaft has 10t in 10t out axle has 60t. so anyway i got it all put together as the kart came with a torque converter but it was pretty old and missing the weight/spring pack so i put my clutch on and...

I'm looking for the original kill switch for the Clinton Panther A400 motor in my 1960 Go Kart Mfg. Greenhorn Enduro. It is a little lever that snapped onto the hex sides of the spark plug and swiveled up to run and down to touch the plug and ground it out. If you have one and can't sell...

Looking for a cat kill switch plate. Looking for either style. Thanks in advance.

I just put a 3hp briggs flathead on my db30, I want to connect the existing kill switch, I have an idea how to do it, but have no time to mess around, could anybody please post pics of how it hooks up for me? Thanks. I am pretty sure that one goes to the coil and the other to the ground but I...

Does any one know how to install a kill switch? What is the extra green wire? Tha model is 111A 611224 tecumseh

I need a good pic of the on off plate for a Cat front and back and mounting plate if possible. Thanks in advance!!!

I have an old minibike with a B&S 3hp engine. I just bought a single wire kill button from OldMiniBikes warehouse and can't get it to work properly. I mounted it on the handlebars and attached the wire to the spark plug wire. When I try to start the bike it's a no go. If I take the kill wire off of the...

i have the lighting coil on the hm100 and the three prong clip coming out of the case (no elec start), and im wondering if anyone knows which of the three wires i should use to come off of for a kill switch? its all im going to use for now. thanks

As the title says...looking for a Cat 250X, 300X style kill switch plate... Here is a pic of one from the photo gallery (Thanks Markus !) Please PM me. Thanks in advance ! :thumbsup:

The old tote gotes had a kill lever that I haven't seen on anything else. I've found them easy to use and very simple to build. It's built out of two strips of metal pop riveted together. The end of the lever sticks out by the side of the gas tank in an 'easy to grab' position.

Today i picked up a 6.5 "Blue Max" clone motor. I got it to start once and run for a little bit. I saw some wires running running around the bike to a switch on the handle bars but when i tried to move them they broke off. The wires ran to the engine on/off switch. Now i cant start this thing at...

I have read several threads pertaining to this matter yet there is always something (wrong color wire, different hook up, etc.) that just doesn't seem right. Here is my clone: As you can see I have the oil sensor disconnected (2 yellow wires. 1 from block, 1 from brass box). There is...

I'm sorry still a newb here. I did a search but found nothing. I have the 6.5 HF clone and I'm wanting to eliminate the on/off switch on the motor and do a kill switch on the bars. I thought I read an article here on the subject but cant find it now.

I hate the open hole that is left when you remove the knob kill switch from the shroud on a clone. I've tried various types of hole plugs from home depot like these without any luck. They don't fit snug in the hole due to the little teeth all around the circumference of the hole...

I'm selling these for a friend, thier N.O.S but do have slight rust from sitting in the shop (see pictures). There's no dent's or major pitting at all. He has five left. $25 shipped:thumbsup:

Looking for a switch made by Miller.This Switch was commonly found on some Speedway bikes.This switch controlls,lights ,horn and the kill op all in one switch and is round,here is a picture of one.Anyone who might want to sell one,let me know,cash waiting,or possible trade.