lost

I have recently found this while searching trough some parts. It is a Cat Switch Plate that I have been searching for to put on my JCPenney's Cat Duster MX mini bike. Previously, I had been wanting to buy one for the bike because I thought it was lost, but I had trouble finding one online. Does...

I rode my Benelli Volcano yesterday and the cap came off the tool kit holder. The original toolkit fell out and is long gone. Totally gutted. Anyone out there know of anyone that has one for sale or where I may find one? Jeremy

I'm thinking about starting up a paypal but I am completely lost on how it works. Can someone give me a simple run through on paypal?

Hey all. My first post to this forum. I am looking for a mini bike like my very first bike. It was a two stroke, two speed commercial built bike. 6-8 inch wheels chain drive automatic. The only thing I remember, other than how much fun this thing was is the name stamped on the points side of the...

https://www.youtube.com/watch?v=IzJtlmvfRYM

It is with sadness that I must report the passing of my Father in Law. We have been caring for him for the last 2 1/2 years. He lived 80 years and had a good run but will be missed. He would go to Maple Grove swap meet with me as well as flea markets. He was a Pastor and a funny guy. Here he...

cant seem to copy the pictures or info on ebay, but my goodness people have lost their minds..........149.99 for two packages of fender screws, washers and nuts for a bonanza.........for sale by lostplanet.........and I believe it......someone is lost for sure.....

Looking for a stock doodle bug engine. I'm not new to the site. My old account I changed,emails and lost the password so I couldn't recover it.the cheaper the better I'm located in chardon ohio

Hi guys, OK, Life is getting real frustrating here. I have a toasted engine for a Sears Roper and I have both secured a running engine and a block to rebuild the bad engine. In the process I have lost some parts for the TC-88 driver. I always put things in boxes and bags and I must have lost a...

I had spark and now its gone:out: The bike was really. really rusty and I can't even believe it had spark with all of these acorns in the shroud. I put new carb on and fixed muffler etc. Sprayed starting fluid in the carb and it popped.:thumbsup: Then I finished cleaning the tank, mounted...

okay so i bought a new honda clone engine i broke it in changed the oil etc then i went and removed the governer and changed the valve springs aswell as a new header, while doing this i broke the gasket on the sidecover and unfortunately lost a dowel pin aswell. i havent done the valve lash...

need the chrome wheel half for this wheel, chrome plater lost mine!!

Glad we are up and running , I'm in detox but think I'll make it ? Anyways where is our little post and thread guide in the top right corner ?? I guess I'm lost ?, PM's too ?

Been busy getting the KE100 I got earlier this summer road ready but I dont have a title. went online and found this place: Moto Recycle - Motorcycle Title Replacement Service any pitfalls or things to look out for, whatdya think?

Read this and had to shake my head. Man, 37, missing for a year found dead by his ex-wife under a stairwell in a house they rented out | Mail Online

Changed stock cast flywheel to arc billet flywheel. I also added an exhaust and OldMiniBikes hop up kit which was the air filter and jet kit (#36 jet). The bike used to wheelie stock motor, now with all the new it does not. I am assuming the lost mass has something to do with it? Or am I missing something?

I need to know the name of this little screw that fell off, I need to replace it but need to know what to search for fist. thanks and its a power sport 5.0 Tecumseh

Hi All, I have a Baja MB200 with a 6.5hp gx200 clone. I recently added a billet rod, billet flywheel, upgraded cam, 18lb springs and chrome moly pushrods. I got the longer rod to increase compression and everything was running great. Great compression. Then I decided to put in a flat top piston...

I have a stock jiangdong 5.5 that never idled right put a new carb still same thing.....so I pulled head off changed to .009 metal gasket from the thick one ...changed to champion rockers with chrome moly pushrods ...installed air filter, header with Briggs screw on muffler I also installed...

Well for the past 2 years I had a guy sandblasting all my frames and parts. I hadnt talked to him for a while since I have been semi retired. But I have been holding onto one last project and decided to drop it off while I was in the area. He wasnt home so I left him a note with instructions...