My doodlebug has 8 slots on motor plate. Will a predator fit those bolt patterns? or do i need a special motor plate? I saw something about motor plates not working on 8 slot stock plates. Can anyone shine some light on what my options are? Thank you.
Anybody know how it mounts? Mine is missing the kickstand, but has a piece of round tube welded to the frame. I have a kickstand located, but not sure how it mounts.
Here's a pic of the stand:
How can I mount a clutch cover to this engine.:out: Some how I need to install some brackets. What is the best way? This is a 1980 2hp Briggs. I want to mount a Taco clutch cover. Thanks in advance
OK, so I bought the reproduction bonanza clutch guard and brackets for my BC1000 project. Locating the rear mount seemed easy enough, but the front mount that goes to the engine is a different story.
First, the PTO bolts are larger than the slots in the brackets. Figuring that these...
I am in need of the jackshaft mounting plate like in the photos below. I do not need any of the other 2-speed parts, just the metal mounting "box". I am hoping that someone has one to sell? Please PM me if you can help out.
Thank you,
Michael
Like the title says, does anybody have a picture of the hot rod minibikes engine swap plate on their DB30 they could post? :shrug: I'd really appreciate it.
I bought one of the OldMiniBikes ones and I'm feeling like an idiot because I can't figure out exactly how it goes. :doah:
It should bolt...
NEVER USED. TAV Torq a verter Backplate WITH Belt for 6" driven. I also have 2 jack shafts if you need them.
Here is a link for the backplate 218525A - TAV Mounting Bracket with bearings & spacers | Go Kart & Mini Bike Parts | MFG Supply
$60 OBO for the backplate, Belt, bearings, and...
i just bought a baja mini and im looking to change the engine and was wondering if someone can point me the right direction im 220lbs. so i need something pretty strong to get me around pretty good...Thanks
I need two B&S 3 HP Air cleaner mounting (part number 27660) item number 163A out of the B&S manual.
This is the black plastic "top hat" looking plastic adapter that goes between the flat type air cleaner and the pulse-jet carburetor. It takes up the space between the two and also allows the...
I have an older B&S 6hp with a 1" threaded shaft.
Are drive clutches made specifically for threaded shafts, or do I need to have it ground smooth?
Can I just cut a keyway and drill and tap the end of the shaft?
Oh, and could I turn the shaft down to 3/4" or should I leave it at 1"? I'm thinking...
do you think , if I put some 1/2" vibration dampering mat under the motor it would have any adverse effects. Has anyone ever mounted a motor on any kind of cushioned mount ?> thanks chris
Hello guy's I bought a pretty cool oval / canteen shaped gas tank off e-bay for my custom. I went through a lot of trouble with it. It was very rusty and the old liner was coming off. I had to soak it in muriatic acid and re-line the tank. After all of the trouble it gave me, and still continues...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.