point

Looking for a new point and shoot digital camera. Touch screen would be nice, but not a deal breaker. Anyone have an affordable model to recommend?

Like the title says, at what point should chromoly push rods be installed? I am building up a gx200 clone, I'm removing the gov., billet fylwheel, billet con. rod, 18lbs springs, dyno cam .275 lift .236 duration, CNC bored box stock carb, and a header. I have heard of the push rods...

I was looking around on GO Karts USA and came across a torque converter for my MB200. What is the advantage of them? Thanks!

Hey Fellas, This is uncharted territory for me. I'm still learning. I changed the points in this HS40. It's the first time I've done this. Is there a gap measurement that is important here? If so, what is it, or where do I find it. It's a '71. Thanks.

Months ago I posted a OldMiniBikes.com wanted ad for a Skat Kitty. A really nice guy from Massachusetts (south of Boston) called, we made a deal & he shipped it! It was complete and I restored every piece; re zinced the bolts, powder coated and chromed everything, and here it is, with the old seat...

I put in my new points and condenser last night and I am still not getting any spark. I still have juice at the plug wire but no spark coming from the plug. The plug is new so I know it is not that. Do I just need to set my points on my engine? I have never set the points on a small engine so I...

But for $50 as long as the diff is good I don't care.

ok got a gx200 clone, flat top piston, arc stock length rod, .010 head gasket, 14cc head w/ stock valves and ported, agk mini bike stepped header, and 24 mm flat slide mikuni carb. i want to convert to alcohol and need a good starting point for jetting.

I don't carry a gun to kill people. I carry a gun to keep from being killed. I don't carry a gun to scare people. I carry a gun because sometimes this world can be a scary place. I don't carry a gun because I'm paranoid. I carry a gun because there are real threats in the world. I...

Hey guys i got a HF 6.5, current mods are ARC rod, Flat top piston, 14 cc head with stock size valves, .020 head gasket, and a 24mm Mikuni Flat side carb. I half ass tuned the carb by drilling the main jet out but i want to fine tune it more. What would be a good starting point for the main...

Hey i'm seting up points on a 5hp and i was wandering if there has to be a space between the condenser and movable point for it to work. If so how much?

Hahahahaha! Manufacturer Recalls Hollow Point Bullets That Fail To Explode Inside Targets | The Onion - America's Finest News Source