rich

Got both of my H60s running today (subjects of an earlier thread). Both have brand new H60 knock-off carbs. After running the solid state H60 back about a month and a half ago, I had way too much fuel even with both circuit screws barely open. So, I reset the floats on both carbs to be a bit...

My engine is running rich I have a140 emulsion tube and a 36 jet in the carburetor. I have not really ran the engine it only has 2.8 hours. Most of this time is at idle for break-in period is that why it seems to be running rich and it will cure that issue when ran at more RPMs. I also have high...

Hey guys first post here! Bought a mini bike second hand off a guy. Has a Powerfist motor on it, unsure if it's a 196/208. They're basically the same from what i read anyways. I proceeded to straight pipe (1") it and externally remove governor (yes yes i know remove it internally, I will very...

Hi Guys - I just got my paper filter kit (along with a header - lots of popping on deccel so I guess its running rich, filter may help lean it out) for my sons Predator 212 which has been a surprisingly strong engine and held up well! Question is this, being a user of K&N filters in 3 of my cars...

I'm looking for a Clinton Panther crankshaft. I believe a 490 or 500 will work. Thanks, Rich

I need 2 Go Power reed petals for my reed cage, used in good condition Ok. Thanks, Rich

Can anyone help me how to delete photos. Obviously computers are not my thing. LOL Rich

I have an old 5 hp briggs that is running pretty poorly..Last year I installed a new electronic ignition in it to replace the troublesome points..The engine ran awesome and I ran a complete tank of gas through it until it quit.. A few days later I put some more gas in it and it would not...

Bonanza Minibike Mini Bike Rupp Ruttman Fox Speedway Skat Kitty | eBay

Lil Indian 2 speed driven clutch I think I've got 4 of them.

1971 Scat Cat mini bike ALL ORIGINAL / make an offer!

:laugh: when I get the money I'm sending every OldMiniBikes a check for 20000 dollars :thumbsup: FINAL PAYMENT NOTIFICATION..(ACT FAST)!!‏ James B. Comey Jr. (vivian@menlon.com) JAMES B. COMEY, JR EXECUTIVE DIRECTOR FBI. FEDERAL BUREAU OF INVESTIGATION FBI.WASHINGTON D.C. FEDERAL...

But probably a steal :shrug: (Hodaka Bonanza ACE 100 vintage minibike)

This is my first post and I will try to get it right! I have an 8hp Briggs with a two piece Flo-jet carb. It will only run with the fuel mixture jet in all the way and choking from time to time. It has new gaskets, needle jets, and e-tube. It was cleaned and ports cleared with compressed...

I have a workshop full of these things. It looks like I'll finally be able to get grandma that operation she's been needing. Tried to ask this fellow a question through ebay but he's not taking any questions. Ogy Vintage Fox 1964 "Campus Bike" Mini Bike | eBay

Hey guys having a problem with my 208cc 7hp Princess Auto clone. I did the usual mods custom air low restriction air filter and custom exhaust header. I drilled main jet out with a #65 bit to make it a 89-90 I drilled the idle jet with a #77 to make it a 45 This carb does not have an...

I'm working on a generac generator for somebody after they had trouble with it running correctly. It idles ok but when you run it up it kicks out black smoke and misses. I took the carb apart and found a rubber o-ring in the bowl. Carb has non-adjustable jets, needle and seat apear ok, no jets...

Hi there. I am having one hell of a time with my HS50 tek carb. Installed a 3.5 hp fixed jet carb and was too lean, so I source a adjustable jet carb with the same bore diameter and cleaned it up, now it runs very rich at all speeds and the miture screws have no effect on how lean or rich it...

I sorta did this on purpose to see what would happen. My stock little Jiangdog Honda clone was left with just a skosh of nitro-pink in the tank and carb over the winter. I wanted to see what would degrade, if anything. It cranked up and started fine this year. However, when I open the choke all...