runs

Ok all you grease monkeys, I have a few questions........ Ok so I finally cleaned the carb and the gas tank, now my engine(briggs 3.5 model 91200) runs, but then bogs. The clutch is also rubbing, making a ringing sound when I just push the bike...is that normal? is the clutch slipping...

So tonight I'm spraying the clear on my bike and I got a little excited put a run in it. How do I get it out? Also, does acrylic enamel protect the paint from rubbing off due to throttle cables rubbing when you turn the handle bars?

I am confused. Got this Baja 196cc running great on bench. It loaded a little on idle, but tolerable. Put it back on the Heat and won' t run for crap. Stock everything. What cha think?

Saw this video on Tyler's facebook, had to share. Some have seen already, but I hadn't! This is just.....FAST. BTW, what is all that fire shooting out right behind the front tire at the ground right at 2:00? Open headers up there as well as rear? FASTEST STREET CAR IN THE WORLD! Larry...

Here we have a nice fairly original Rupp Roadster II with the correct 4HP Tecumseh engine complete with Working Lighting coil. Headlight works, kill switch works. Brakes both work well. Tires hold air. Gas tank is not all dented up and petcock does not leak. Has the stock TC1 converter...

I have a pretty original shape dunecycle here (Obviously the engine is not original).. Never cracked or rewelded etc.. Still has the A.P.E. off road disclaimer sticker on it. **EDIT**The rear has all new chains, new bearings not installed, new bearings in jackshaft.. etc.., New clutch on the...

6.5 grayhound. Mounted on a mini bike. Low oil sencer cut. I ran fine then I turned it off. About 10 mins later I web to go start it again and it started ran for about 5 secends then died. So I figured it's outa gas. Put more in ran the same so then I figured well I dot have the air cleaner box...

hi my hs40 needs choke to start it then it will only run on half choke when i flip it to run position it dies and it really dosent run that bad on half choke even after its warmed up only runs on half choke :shrug: it ran that way before i rebuilt the carb does anyone know i searched this...

Briggs & Straton Washing Machine Motor theres a link to a 1/2 hp washing machine motor from 1938 that i found... is his asking price good? i wouldnt use it cuz the hp is so low, but it would be cool maybe to put on a old mini i might be getting.. are they valuable?

So it moves both tires? where can I find some?? Also what is better when sprocket is on wheel and it moves one tire? Or when sprocket is on axle and moves both? Would it stress and spin slower since it turning both wheels? heres the kart

hi i have a new built 6.5 clone it has a rod ,flat piston and 18 lb springs. i bolted to a gokart frame to let it run.it runs a little rough and loud.? it shakes at a low idle. it is easy pullin but takes .10 good pulls. nothing seems to grind when i pull it. . what first? pull the honda...

PS, theres a seat that goes to it too but isn't pictured and it's in Olivet MI :laugh: It's gonna be 200 on craigslist.. :laugh: The Turdburglar Kart i built for Bens kids.. Now he's got drama and not looking for go karts.. :laugh: So I guess it's for sale.. Briggs 3.5 shorty shaft but is...

Hello there guys Selling this Hm80 Tech Really badass powerfull engine Will be right at home on some of the larger minibikes or gocarts, trikes Looks better in my opinion and Im sure will beat the chit out of a stock Gx160Honda/Clone that alot of people are using now It has a 1 inch shaft...

Ok so I was riding my mini earlier for about 20 min..got a few blocks from my house...and it dies. Went to start it, and it starts on the first pull like always. Idles fine all day long but as soon as I even attempt hit the gas it dies. So I got stuck pushing it home. So what do you think, dirt...

older H30 engine, was sitting in a minibike at my grand parents. can only seem to get it started choked, and it only runs for a few seconds. people have been telling me the carb needs to be rebuilt, dosent seem too big or hard, but what exactly do i need to do to the carb, this is the...

This one I got about 1-1/2 yrs ago,had the wrong intake/carb/exhaust on it.Added the right manifold,installed a nos clinton carb with air and fuel adjustments,installed the right muffler,and lit it off.Runs perfect with NO SMOKING AT ALL.Was going to use it,need the space(and money).I'll sell it...

I bought this bike and was gonna use the engine off it but i decided to use something else. The bike is well built, tig welded all around and beffed up frame. Tri star rims and 6" ballon tires. It also has a foot brake that attaches to a band brake. Its in great shape and runs and stops...

My brother and I finished rebuilding the carb on the $25 Sensation MB6 barn find last night and took turns riding it around the neighborhood... Pics will be forthcoming as soon as I figure out how to download the new camera into this new PC... My old PC crashed and died, taking with it...

Just an old 2009 shakedown video I found of my boy on his modified Clone 200 mini bike. YouTube - PasadenaBoneshaker's Channel No cus words in this one Charles, LOL