series

Anyone watching it. :laugh:

Looking for a long (10 3/4") Bonanza jackshaft for the 1400/1410 style bikes used with the outboard sprocket. mine is still useable if I reverse the way it sat (the bearings ate into it a little bit over the years) but would like a new one, and I dont think I will be able to make the cuts for...

I bought this used Comet TAV 40 series in the hopes of using it on a bike I am wanting to convert. But it is too big for the frame. It came off from an old school Nomad trike and looks to be in good, (though slightly rusty), useable condition. The driver has a 1" bore and the 7" driven has a...

Found a decent bike, missing this fender and a long chain guard. I could also use an original Cat 400 seat. Thank you for reading.

Hello All I have a brand new, OEM Tecumseh throttle designed for cable use. I no longer have a need (thanks Owen!) for this...and I need more mini bike money! $20 to your door scores this instant classic!

If anyone is maybe working on a '68 C series or earlier continental Rupp with internal spring forks I am trying to get a measurement from bottom axle mounts to top of bars (like if it was on a bike with a load on it) and also spacing for the headtube between the plates. Actual forks I an...

I have two Bonanza BC Series MINI Bike builds going on right now. I am going to build both of these bikes stock: wheels, fenders everything but the following items. Both bikes are going to have a custom two color paint job with the handle bar and remote fuel tanks white and the frame and pegs...

Trying to see what original parts are out there. Starting with forks and frame, so pretty well need everything to make it at least roll for now. Send me a PM with your location, what parts you may have and what you are asking for them. Thank You for your replies, doublet1951 Oklahoma

First off, I am not asking what it is worth. I am asking if it's worth spending the money to restore. I don't know anything about mini bikes but my grandson is wanting to build this frame. This is all he has of it. Would it be better to start with something else?

Hi guys, I am thinking to improve the performance of my robin subaru engine, the problem is I don't find any mod parts for robin subaru engines. I was thinking to install a stiffer valve springs and an advance key timing made for honda/clone engines, so I would like to know the...

I picked up a early 70"s mut cat trike. The clutch that's on it is messed up. Is there a way to replace the springs on it. I found a30 series clutch for $135. But I'd like to replace the springs and save some money. Any info would really help. Ill upload pic of setup that's on trike. Thanks Ken

*DRIVEN* In good shape needs the retaining clip to hold it together. Was fuctioning fine until that clip broke...40 plus shipping located in cedar falls Iowa

Hi Guys! I'm trying to take apart this 40 series torque converter driver unit (one that goes on the engine) and can't figure out how to do it! The outer piece has a big nut welded to it. Does this unscrew? Trying to clean it and can't get it apart! Thanks for your help! Tom

:scooter:Hi everyone I'm looking for a good used comet style clutch in a 40 series. I'm using it on a 3/4" shaft I have ordered a 3/4 x 1 x1 1/4 adapter. I have looked all over and it seems in the 40 series they only come in 1". I did see it in a, I think a 44 series it came in a 3/4 but they...

Kind of cool. I just finish my three year project Taco 22 and this turns up on Craigslist. I couldn't pass it up for the price. Well it was a Taco Frijole until someone cut and extended the top bar, added a long foot brake, fender and cheap seat. Here it is after I got it home and...

original paint Broncco TX series coffin tank. Came off a TX2 originally. it is in very nice cosmetic shape, on tiny ding from the forks. it will need cleaned out before use, I found filling tanks with evapo rust or something like that and letting them sit a little cleans them right out...

Picture #1 shows the inside sheave not retracting fully so the kart wants to move instantly. Picture #2 shows the rollers and springs have "jumped track". Picture #3 shows the inside of the cover. I see no obvious issue with the sheave or cover so what is causing the rollers to do...

Hey guys I've got a comet clutch that's just sitting around in my garage. I bought it as a spare but I have no need for it anymore. This is for just the driver unit. I'm asking $60 shipped. This is not a reproduction comet,this is a real deal comet. Thanks for looking!!

My new favorite arrived today. Late 1967 or early 1968 I've been told. Did a light cleaning, assembled it, put on all new chains, a new throttle, some fresh gas/oil, it fired right up and ran like a banshee for all of 2 minutes, then stalled. Re-started, runs a bit, then stalls again. The two...

I think I found the "Broncco Minibike man in Pa!" Met this awesome guy today.... And bought this TRX-1 off of him And the hard to find parts that came with it (NOS green grips,chainguard, kick stand etc.) In his basement was a NICE stash of Broncco bikes and parts. I don't know if he will...