series

Looking for NOS Comet Series 30 1" bore driver for engine PTO shaft that uses the asymmetric drive belt and the matching Comet Series 30 3/4" bore 6" driven variable pitch pulley unit. Must be made 10+ years ago by the original Comet Industries. I realize the newly taken over Comet...

Would any Tillotson carb gurus know the specs of a HL-87C carb? Thanks.

I have come to the conclusion that this is a 500 series. I can't quite make out the markings due to pitting. I tried sanding the surface, but it didn't seem to help much. I need to remove the clutch so I can rebuild the engine and clean and lube the clutch too. I have scratched my head for...

I am getting a predator 301cc (8HP), for my bad dog mini bike build (the big one with the 22 tall x 11 wide tires). I know it's at the upper end of the limit, but I am going to use a comet TAV2 30 series converter for the 1" shaft (218355). My question is: has anyone bolted one of these on...

I picked up a new Salsbury 700 series driver and now I need a driven to go with it... will a Comet 40, 44 or 500 driven match up to it? if not what Salsbury Driven will match up? will a Golf cart driven match up? This is my first Salsbury so I'm not sure what will work together..

just wondering how well they work and hold up to a big block off road? feedback appreciated.

6" driven good backing plate. Have the one fin cut to fit on a baja with a clone engine. Drive in good shape. Was used on a baja for about 5hrs and taken off last year. Lightly used belt and brand new one included. Sorry no cover. $120 shipped

Looking for various Broncco TX series parts to build my mini bike as close to stock as possible. I need a lot of parts so let me know what you have and i probably need it lol Thanks, Jim

I purchased a generic Comet 20 series symmetrical TC for my 1971 HS40. I was hoping this could just bolt on and go, however, there are a couple things that I'm not sure about. 1. The inner sheave of the TC sits extremely close to the engine and damn near rubs the guard that is mounted to the...

orig comet 30 series, 1" driver, 5/8 driven, no cover or belt...aluminum backing plate $90

Hey guys, I'm looking for either a 1 inch clutch for a Honda GX390, or if anyone has a 40 series torque converter laying around that they wouldn't mind getting rid of that'd be awesome as well. Thanks guys and just shoot me a pm!

No cups for it, probably clean up pretty good. $25 shipped, pay pal fees apply As a bonus, I will toss in this used, but in good shape original Cat footpeg cover. :laugh:

im looking for a 7 inch comet 30 series driven unit. part numbers are 217611A or 217778A. any condition.

For sale a couple of unused Comet symmetrical belts. # #1 is Comet part number 203587A for a 11 inch OC for a 20 series or 340 series use. #2 is Comet part number 203586C for a 10 3/4 inch OC for a 20 series or 340 series use. Price for the pair $25.00 plus shipping from Portland...

I bought a trashed engine today, unseen, for 15$. All I knew, was that it was a honda. When I got it i saw it was a Honda G200 197cc. I bought it for parts, but as I only have gx engines, i doubt any parts ar interchangeble. ?? or ?? Engine seems i god shape, but the conrod is...

I'm looking for a Comet 20 series driver for a 3/4" shaft. Used is ok a long as it's in good condition.

Ok, guys I need some advice. So I bought an old Manco trike, pictured below. And I want to convert it to a fat guy minibike…. So the trike has an 8hp Briggs and a 40 series clutch on it. My idea is to narrow and lengthen the rear end so I can fit the rear tire without repositioning the shaft...

Selling my Tecumseh HS50 that I bought a couple months ago. I was going to use this on my Gilson project but decided to go ahead and get the more correct H50 engine. It came off a lawn mulcher and ran great when I took the mulcher apart. The only thing missing is the gas tank and tank mounting...

What's the main differences between the animal, animal. Local option 206, and M series?

I'm looking for either R or S series doodle bug frames. I have a stock S series fork & bars front end to match them up with either frames. I read somewhere here' with extra washers they become interchangeable. What's you're 2 cent's?