solid

  1. J

    HS50 points to Solid state Magneto

    Hi all, Newbie here. I was wondering if there is a kit or mod to change the points magneto out on a HS50 to a solid state type? Thereby getting rid of the points. Thanks for any help.
  2. ogygopsis

    Solid State Module for Briggs

    Brand new, still in box, never been mounted solid state coil for Briggs. I ordered the wrong one for the motor I was working on. Part number is 440-401 and replaces Brigg's #397358. I paid $35.00 but the first $15.00 takes it. I'll pay shipping. PM me if interested. Ogy
  3. 125ccCrazy

    Big Block Tecumseh lighted flywheel for solid state engine

    Looking for a solid state lighted flywheel for h50-h70 Tec...I can get a new lighted coil if you don't have one, I mainly need the flywheel..
  4. bikerboybenny8

    WTB Bird Nighthawk Thunderbird Solid Forks

    Bird Nighthawk solid forks... no suspension... MEssage Me!!!
  5. JohnnyTillotson

    Converted points to solid state?

    Ebay item 151773363101 In the description the seller claims he converted this 60's engine to SS. Can that be? I thought only the old Briggs can have that done to them
  6. FloridaMiniBikes

    Tecumseh 6.5hp OHV Saturday Mini Bike Parts

    Tecumseh 6.5HP Took it off a go kart when the owner wanted to go, faster faster. Compression and spark is like new, starts first pull, even though it's been sitting a year. I wrapped it in plastic but the Florida sun did a number on the tank. It's solid, but cracked not leaking. Cleaned and...
  7. E

    Newb from Minnesota!

    Just scored this Cat 400ts running for $200! My first mini bike so I'm sure I'll have tons of questions! Please give me your input or advice! I'd like to resto/mod this so it's a solid rider!
  8. trinik7597

    bonanza for winber build

    going to winber this year so i figure i need a bike for trail and field riding and maybe mud :laugh: have this bc1200 i been gathering parts for so this is the one :thumbsup: while i am finishing up my build off bike i figured i would get started on this too . gonna be a stripped down version...
  9. trinik7597

    big seat

    almost new seat 181/2 long 9 wide 31/2 tall perf top material silver pipping solid sides $60 shipped :thumbsup:
  10. Txpowdercoater

    is this a columbia?

    I just bought this roller for 80. it looks like my 71 MTD but mine has a flat motor plate and also has a solid rear, this looks like it might have been made for a suspension rear version bike also, the one I have already is solid rear seat mount. what ya think?
  11. jeffdubb8

    Tecumseh Performance Help

    I have an H70 that I'd like to "hop" up a little and gain a few more hp from and make reliable as well. I'm not looking for some insane engine that is squeezed to the gills and needs a rebuild every other run. I'm looking for some solid (mildish) performance upgrades. I'm using an H70 circa...
  12. Peekster

    Looking for 2 - 4in clutch drums

    Looking for a pair of 4in clutch drums.Sprockets can be worn out becuase they will be milled out.These will be made into brake drums. Solid drums without holes would be perferd but any will do. Thanks
  13. jspec

    WTB any solid running briggs or tec engine

    Preferably 3-5hp just post a pic on here and I'll shoot you a pm I'm located in tx. I'll pay a bit extra if it has a clutch looking to be within $100 depending on the condition I want a motor that will fire right up.
  14. 125ccCrazy

    is there a solid state coil to eliminate points on Tecs??

    wondering if they made an under the flywheel solid state coil to use on a points ignition on Tecs to eliminate the points? if so would anyone have a part number.... Like to do away with the points on my h50 and h70...
  15. L

    Need a solid 9 hp motor recipe...

    Ok i have a 6.5 clone motor, and a comet TAV-30 the hp rating is 9 hp on the TAV, so i guess i shouldnt exceed that so the torque converter lasts. Looking around i found that i could get close by removing governer and rejetting carb and adding a header. I realky dont know how well the stock cam...
  16. A

    Wanted: Mint Fox Sundowner with solid wheels

    Hi Lads, I'm in the market for a mint or excellent condition Orange Fox Sundowner with steel wheels(some had spokes) and oval tank(some where wedge shaped).Any manuals or original paperwork would be a big plus.I'd be interested in trading a totally original 1974 Kawasaki 90cc MC1-M...
  17. minimotor

    Solid State Ignition

    Has anyone used this ignition system? It's for sale on Ebay. Any input?
  18. bandit 40

    solid 3hp briggs camshaft

    Hello, all I was looking for a good 3hp briggs camshaft Thanks for reading.................BANDIT:thumbsup:
Top