wanted:

I need one wheel for a Gilson wheel. Both halves need to be in good condition. I don't need the bearings but will take them. Below is a picture of one. Shipping would be to Hanover, PA 17331.

I just recently scored a west bend 820 with slanted spark plug for climbing under a guys car and replacing a leaky transmission valve. he claimed it was used on a boat and has a strange thick steel L shaped mount on the bottom, maybe to bolt to a transom with chain drive to a propeller? i...

Looking for the coned spark arrester screen insert, and flat end cap. Any condition is fine, drop me a message if you have these parts hanging around. Thanks, -Marc

Stand for small frame Cat please. H30 is for the same bike.

looks like this... I need a QIND 13x5x6 front tire to match a 13x6.5x6 rear I have now..

I picked up a fox mini bike that looks just like a street scamp but the forks are not the suspension type. The frame, forks, and swing arm have been powder coated, I also have the rear rack and gas tank, but no fasteners at all, so if someone could help out with pics of what exactly i need for...

Looking for the frame only (do not need forks) in good condition, that is not damaged/bent or in need of welding, straightening, etc. Please PM me with what you have. Thank you, Michael

Hey Fellas, I'm hoping someone has this L-shaped piece, and the spring that goes with it laying around. :thumbsup: I believe it comes with a spring that mounts with it as shown in the exploded parts diagram. I've also seen them like this.

Looking for a 1977-1979 Yamaha YZ80 rolling chassis ("Roller") for our freshly rebuilt 1977 YZ80 engine. Does not need to be pretty, but need it generally complete and in working order. I'm in the Los Angeles area of Southern California. Please PM me if you have one to sell or have any leads...

early rupp frame wanted roadster 1, and earlier models wanted.

I am looking for a larger mini bike frame/fork or just frame. Anything about the size of an El Burro/Heald. Condition doesn't matter. I am an hr south of Boston Ma and will travel a little. If more than 3 hrs away must be able to ship. Thanks

Hoping to find an old fixer upper predator 6.5hp Predator engine or used one, nothing too broken. Lightly used would also be appreciated. Thanks!:scooter:

Need just one... This is Type I style: Cash waiting!

Looking for a Rupp clutch cover like the one pictured below….believed to be used on Rupp Continentals up to '66..maybe in '68 also. The correct cover has the rear mounting slot on top…others have it on the “face”, I can use either one. If you've got one that looks like this PM...

Looking for my next project! Boonie.bike? Fat tire? Suspended bonanza? As close to mid michigan as possible.

Looking to buy a hot rodded 5hp Briggs. Nothing too crazy still needs to pull start and drive around good. Have plans for a mini drag bike to use around the pits at the drag races. Sent from my iPhone using Tapatalk

This is the last piece of the puzzle I need for my Dart Cycle....I've seent hese on some Tote Gotes, Italian Scooters. ..and sold as an aftermarket accesory: Got cash in hand..or perhaps can trade for some hard to find part your looking for. PM me if you can help..:scooter: thanks...

Looking for a Ruttman Spyder roller or complete. The closer to St. Louis the better but I can have STI pick one up from anywhere.

Not quite a mini-bike but somewhat in the same family. Looking to purchase or make a trade for some restored bikes mimi-bikes that I own. Need a project.

I'm in search of an H35 side pooper cylinder. I have all of the other pieces to complete the engine, just need the cylinder itself. If anyone has one they would like to sell, please post up! I'd also consider a short block if the price is right. Thanks in advance! Daniel