I recently got this Hornet from OldMiniBikes member Casey Davis. (Thanks again Casey.) This is "now" my official entry for the Build-Off. I want to keep the Jack-Shaft which means there's not enough room to use a Clone engine so I'll be looking for a Tecumseh engine.
I haven't had time to start on it since picking it up except to put some penetrating lube on the Jack-Shaft locking screws. If the locking screws on the Jack-Shaft don't come loose I might jump ship and go with a clone. I really don't want to cut off the Jack-Shaft mounts though.
I haven't had time to start on it since picking it up except to put some penetrating lube on the Jack-Shaft locking screws. If the locking screws on the Jack-Shaft don't come loose I might jump ship and go with a clone. I really don't want to cut off the Jack-Shaft mounts though.