air

FINALLY GOT A CHANCE TO WORK IN THE GARAGE TODAY AS THE TEMP HIT 52 DEGREES. HAD THE WHEELS SODA BLASTED AFTER CHRISTMAS, POLISHED THEM AND INSTALLED WITH NEW BEARINGS AND TIRES. RE-DID THE FENDERS AND PAINTED THEM METALLIC GOLD ALONG WITH THE CLONE TANK AND AIR CLEANER. READY FOR MOTOR INSTALL...

These "Indian Head" air cleaners can be found as factory equipment on late 60's early 70's Tecumseh powered mini bikes. It has the Tecumseh Indian head logo embossed in the rubber. Here's one I just replaced in a '71 Bird Scat Bat: You can still buy replacment air cleaners but the...

Need a new carburetor for my kart. I have a 1970 H35 Tecumseh with a Taylor spark arrestor style pipe on it and the stock air cleaner. Most of the carbs I see for sale have extra long choke levers that are in a different orientation. It seems like it would either hit the air cleaner or...

Anybody out there got a good recipe for a "generic" air filter oil spray or is it best to buy the kind in the can ?

I picked up what I think is a Rupp Continental from a neighbor. Needs complete restoration and will need some engine parts like coil and plug wire, and probably a carb and air cleaner. I don't see any ser # or other identifiers so can I get some help from a few pictures? Thanks for any help!

What's up guys, first actual mini-bike. My bike is about a week old and of course I'm increasing speed one small easy step at a time. Currently set up as 5" sawtooth tires fr/r. 12t front, 60t rear. Completely stock engine, zip tie on gov to get a few more rpms. So far I have GPS'd the bike...

I have no compression on this motor. everything turns over nice, I can feel air when sparkplug is removed - just not a lot. any ideas??

Found this one last fall on CL down in Cinci. Everything there except carb, tank, air filter, and throttle. The 2-speed jackshaft, shifter, seat, fenders, chain guard all there. A bit of surface rust all over but it didn't see too many miles. Tires hold air and the tread is almost like new...

The engine wont run off choke. Cleaned the carb tried putting the muffler back on for less air flow. Could Ive damaged the black spacer some how thanks.

I put some aftermarket parts in to my 6.5 honda clone motor. Comment on what els you think i should do to the motor Exhaust Before:stock greyhound exhaust Now: aftermarket custom header Air filter Before: stock greyhound air filter Now...

Aftermaket air filter for my 6.5 hp honda clone

I purchased a aftermaket air filter for my 6.5 hp honda clone the guy at the mini bike store said it will give you more power enough to ware you can notice it, Can some one tell me if it can or if it cant i need more opinions. Thank you

I had and old style Tec air cleaner chrome plated for long term goodness! This the housing that is solid in the back and pulls air around the circumference. This was NOS when I had it plated. It has a couple of indentations in the back, but otherwise it is perfect. Looking for $45 plus shipping

Just got finished up building my Trike mini bike. I modified a Baja heat into a trike. It has a HF 301cc predator engine with a torque convertor. It has a new pipe and air filter. I made the seat myself through some go kart slicks on the rear axle.

Hey everyone, Just curious what main jet size you are running in Predator with light mods like air filter, header, and gov removed. I am in northern panhandle of West Virginia. I have the Predator 6.5hp with air filter, header, and gov removed. I got the 140 emulsion tube and a #93 / 0.37"...

I just picked up this Sportster 1200 custom. 5600 miles bone stock. I've got new air cleaner and pipes on the way and plan to change out the seat.

Looking for a White Air Filter assembly for a Tecumseh H30 Engine.

Hey guys. I have just about completed my mini chopper build. I put a new 6.5 predator motor on it and took the bulky stuff off of it. I put a simple air filter cone on the carb, and am using the harley gas tank as the actual gas tank. I also welded my own exhaust pipe on. It sounds and...

Leftover parts from my Roadster rebuild. Asking $200 obo for everything. Located near Raleigh, NC. Gas tank has a small pinhole, but not dented. Don't know anything about the engine. Needs carb and air filter, but I was told that it runs when I got it with the parts bike. I'll answer...

Ok hello to you all. this is my first post. I consider myself a very good home mech. I have pulled trans and engines, BUT OMG this pred engine is driving me nuts. history: I got a go cart from a friend, for a father son project. It has a pred 212 engine. It fires up on the first few pulls, but...