air

Hello everyone. I just picked this up at a local auction and have no idea except for the old air cooled cr motor, any ideas? Thanks http://nebula.wsimg.com/df2b45bf448a5840c18dec80b3b92866?AccessKeyId=AC5B7E286304155B64BF&disposition=0&alloworigin=1

I just installed the new ARC Billet Flywheel and thought I would share a small idea I had. I wrote the coil gap on the coil for future reference. Also notice how I slide the air filter rubber past the mount and then clamped it down, it now has no way of slipping off if hit while off road. Cause...

I need an air filter for the 8hp Tecumseh in my Super Bronc. The actual Tecumseh part number is 33269A. Hopefully my pic will show up. Let me know what you have. Thanks, Jerry...

Two air filter housings. One white other looks to be primer green. $20 each shipped.

So I got a Craftsman 7 Gallon 135 PSI horizontal tank for xmas yesterday and I'm trying to determine what I can do with it so I can buy attachments. I'm thinking it'll be good for painting but would this size actually be good for air rachets and sand blasting? Thanks

When I ordered the angled air filter kit for the predator 212, I thought it would clear the frame. Well once I tried mounting the filter to the adapter it was apparent that it would be that easy. It's on slightly crooked and does touch the frame fairly well. Could I make-shift a cold air intake...

I built a drag bike from a nitro 44 frame. The motor is a predator 212 that I rebuilt. - DJ-114X ARC top plate/throttle hookup - 6934 ARC billet air filter adaptor - DJ-1257 Choke hold - Fuel Pump - 6877 Pulse inlet fitting - 6899 Angled air filter - 5' fuel hose - DJ-1420 Chain...

I built a drag bike from a nitro 44 frame. The motor is a predator 212 that I rebuilt. - DJ-114X ARC top plate/throttle hookup - 6934 ARC billet air filter adaptor - DJ-1257 Choke hold - Fuel Pump - 6877 Pulse inlet fitting - 6899 Angled air filter - 5' fuel hose - DJ-1420 Chain...

I'm in need of an air cleaner assembly for my old Tecumseh 10hp. I'm needing it in the vintage Tecumseh white since the motor is all white looking for a NOS or a very nice one. Or if you just have the outer cover that would work also. Just let me know what you have I'd appreciate it. THANKS!!!!!!

Hey Fellas, I have an NOS Power Products air cleaner for sale. $100 plus shipping. Thanks. :thumbsup: Exactly like the one on my Dart...

Hey all, I just picked up a runner H35. I have rebuilt Briggs before but have not been able to do a Tecmseh. :thumbsup: the first digit of the year is a 4, does it mean that is is either a 64 or a 74? :confused: The coil is under the flywheel on this engine. Is that the one you can run...

Looking for an original Honda Gx160 air breather assembly....or just the top cover with filter and wingnuts. I have the lower base with the air breather post but I'm missing everything else. Free is best but I can send some cash too....:thumbsup: Thanks!!

6" power dyne rear wheel assy with sprocket. Tire has side wall cracks but holds air. $75 shipped to lower 48

Here is the air scoop with the perforated grill and fully painted. Turned out nice.

I wanted to do something to promote better cooling of the head on those long rides and this is what I came up with. This custom air scoop was cut from 16 gauge aluminum that I had laying around the shop and then painstakingly tig welded together. Surprisingly, the mounting holes I drilled lined...

This is the air filter assembly I am missing. The AH-47 filter element is similar but has a 90 degree cast aluminum inlet.

This is the air filter assembly I am missing. The AH-47 filter element is similar but has a 90 degree cast aluminum inlet.

Briggs & Stratton 7HP / 8HP Air Cleaner Assembly