assembly

Im looking for a tecumseh non lighting coil point type breaker plate assembly like this ----> prefer complete but can work with parts as well. thanks.

Looking for a side fill tank for an HS40 (for an ST100 project)... in good condition, would prefer metal, but if all else fails, plastic would be fine till i can find a metal one... motor should be silver when finished... current motor has a plastic center fill tank in great condition (new)...

I'm looking for the brake half of a rear wheel and the brake assembly. Any help would be greatly appreciated!

I have a set of excellent matching GO-POWER wheels 6" x 3.5" I just had these media blasted they are in very good condition No dings cracks big chips etc. $200 plus shipping. I cant get pics to load but will gladly send you over pics via email or text The wheels and sprocket have been media...

Hey everyone! I live in Warner Robins Ga. Just picked up a Murray Track Mini Racer 2. I only paid 100 bucks and it is in great shape other than the carb leaking gas and it's missing the entire air cleaner assembly. It ran great around the neighborhood. Brings me back about 28yrs when I had my...

In average to good condition.

1970 Roadster, Enduro, Scrambler. Front brake assembly. Backing plate, hub, axle and spacers. Free Shipping to lower 48 states. $65.00 Roadster, Enduro, Scrambler. Rear Brake assembly, sprocket, axle and spacers. Free shipping to lower 48 states. $75.00

Almost every part , all parts are plus shipping , Frame w/kickstand $40 , forks $25 , front wheel $25, $35 w/tire , rear wheel $30 , $40 w/tire , front or rear axle , nut , spacers $10 ea. , complete throttle assembly $15 , complete brake assembly $15 , kill switch $8 , front fender and fork...

One piece front forks/handlebars with suspension.

On the governor assembly internals ....what side does the thrust washer go on?? Thanks for any help.

Looking for a White Air Filter assembly for a Tecumseh H30 Engine.

New mini bike frame with 6 inch new tires and wheels. New seat. Unpainted one inch diameter steel frame. Heavy duty frame for racing. Jack plate assembly included. Has brake drums and shoes on rear wheel

Previous owner didn't have a clue. Indian or Rupp? Someone spent a lot of time "engineering" that stainless scrub brake assembly and engine lift washers... I wouldn't cut it all off if it worked better. Never mind the wheel in the first pic/getting used to posting pics here. Thanks for...

Today, I started tearing down my 1970 Roadster for the build-off. After a few days of soaking, the swing arm assembly finally came apart and I was able to get the entire bike stripped down except for the jackshaft. I can't get the roll pin out. I tried using all sorts of different tools to knock...

Looking for a 200x or 250r front wheel and tire assembly for my trike project. Would like to also be able to get the disc brake,line, and controls as well. Texting is the best way to get ahold of me if you have any parts. 910-467-6674 Thanks

I need a jackshaft assembly for mtd columbia trailflight etc etc thanks Timothy

Parting out a Power-Dyne chopper. This listing is for the Foot Rail Assembly W/ K & H Caliper. This rail assembly is in great survivor condition. You don't see these very often, not even on Ebay. So get it before I list there. Just look at OldMiniBikes Power-Dyne choppers in the pic section. Their...

Hello, Recently found a nice round chrome housing with glass front(as the one on bike was missing). I took out halogen bulb? (i believe?) and installed a 6 high powered LED HI/LOW beam assembly. The assembly has all the SMD voltage regulators and resistors(on the assembly). It's a chinese...

Looking for an original Honda Gx160 air breather assembly....or just the top cover with filter and wingnuts. I have the lower base with the air breather post but I'm missing everything else. Free is best but I can send some cash too....:thumbsup: Thanks!!

Hi. I'm looking for a sprocket/hub in good condition for my '65 Fox Doodlebug, the old one is worn out. It's got a disc brake (not drum), and the hub attaches to the wheel with three nuts.