I had bought an MTD roller to use as a donor to freshen a survivor up that I have but decided not to. Hopefully there are some guys that can use some parts to freshen theirs up or complete them if needed. I did not want to clean anything as everyone has different means and ideas of what they do...
The bracket is cut from 14 gauge steel like the original. This would be a nice piece for someone restoring there original cover. I only had a couple of these 14 ga. cut so the cost was high..... PM any questions. Thanks, Nate
1 Bracket $30 shipped in the US
Chrome fenders. $150 for the set. Chrome on rear fender bracket isn't as good as the fender. Front fender only has one original bracket I believe.
Chrome rupp shocks. Measures 11" eye to eye. Chrome is good and shocks move freely.
$75
Prices not including shipping
I got a hell of a deal on a Flying"O" MTD with a HM80 3/4" shaft tiller engine with reverse shaft, the engine will power a Super Tyke roller I have. I need the jackshaft bracket and clutch if possible bit would take a bare bracket and build it up. I also need fenders and some cheap 12" eye to...
I'm gauging interest in who would buy these brackets if I get some laser cut?
The original bracket that I have is 14 gauge but I was going to get 10 gauge brackets made also. The 14 gauge brackets were prone to crack so the manufacturer began to double up the bracket on the later versions...
Built this bike last year around the end of summer. Took the back wheel off so I wasn't tempted to run it it the snow. It was a beautiful day out today so I put the wheel back on added a different chain tensioner. It is one from a baja warrior jack shaft plate. Works great and looks kinda cool...
So ol' JBRocks attached his clutch brake to a 1/4" bolt which would have led to a failure one sort or another. I suggested he make a bracket to attach to the four holes that surround the PTO...BUT! JB had the side cover without those four holes. That got me to thinking! I sat down first and...
Hi. Anyone know what the correct original color was for the Rear fender/ Licence plate bracket for 1971 and up Rupp Roadster Etc.
I know black, but flat or glossy?. Thanks
I have been working on a 3hp side popper for my Manco mini and today I came to the realization that the fuel tank is mounted on the back of the engine and will be impossible to refuel. I have a junk 5hp with the tank on the front of the engine the problem is the fill cap interferes with the tank...
Bonanza parts of a front pegs frame
Swing arm with shaft
Bracket to hold up chain cover (only small bracket)
Foot Pegs
Rear shocks(one of the springs are broken)
ALLLLLLL bonanza Parts for $115.00 Shipped
Frame has no major issues, under the driven clutch area there looks to have been some bracket possibly an added clutch cover bracket welded an removed leaving a high area on the frame tube. Otherwise the frame is excellent as are the forks and handlebars etc. Factory 2 1/2" band brake still...
I know it's a bird product. I don't believe it's a drover. It's in my kitchen already. Any idea on a year would be cool too. It's surely newer than the Sears tarantula. It's got a spring bracket or attatchment directly on the brake that the Tarantula does not have. The gas tank is also smooth...
I'm new to the site. I have a Baja DB30 doodle bug, I have a new 6.5 HF motor that I want to switch out. What else do I need/should do other than the adapter bracket? Chain, sprocket, clutch?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.