6.5 Clone:
ARC Stroker crank
ARC rod
Flat top piston
Aluminum flywheel
Head work: ported and oversize valves
Tillotson carb
Includes Uni air filter and exhaust pipe
Just freshened up
$625
guys, take a look at this. cool stuff this guy builds out of old enigines.
go's by 805ROADKING on you tube.
here is couple things he has done and working on too....:thumbsup:
complete custom built hit and miss engine finish
HOMEMADE HIT & MISS BRIGGS PROJECT (part 14) - YouTube
4 CYLINDER...
Was looking around on Trademe (NZ's ebay) for minibikes and came across this
Other Mini Bike 1960 | Trade Me
wish I had the extra coin to get it.
Just thought it might be a conversation starter is all.:thumbsup:
I installed a billet rod an a wiesco flat top piston 2.756 standard bore an a dyno cam when installing piston the 2 oil rail rings in the oil expander ring droped in pretty easy, top compression ring I had to use a pop sicle stick is it normal for the first set of rings to go in no problem...
Replaced rod in added new weisco piston standard bore seemed like the 40 min break in time that quite abit of oil is passing threw the side of piston not bad but enough to smoke when acclerating or hitting throttle hard will this clearup or should i tear down in put stock piston back in took the...
Well we had to wait all weekend for the rain to subside, but Vinny got his minibike and was VERY happy (he insisted on paying for our pizza). It didn't go exactly as planned, but we loaded up the minis and hauled them out to the country and spent the day riding the back roads. Im pretty sure I...
This past summer I posted a photo of my mini bikes on Facebook. An hour later my nephew calls (he lives in Mississippi and I live in Indiana) and says "what are those"? I said those are mini bikes buddy. He says "I gotta have one of those"! So his dad (my youngest brother) calls a few weeks...
Hello guys, just wanted to post my ride. I know there is alot(mainly) of vintage and vintage styling mini bikes here on this site, but I am going to giver a go on my ride here in this forum.
My bike is a one off custom "mini" chopper That I finished building a few years ago.
The whole...
Hi everyone! I’m new here so it will take some time to work-out everything. I have a couple of old three-wheelers from the 60’s. I couldn’t find parts so I am in the process of using what I can find, (I hope that’s not a problem). I will post picks soon, got company now! Heheheeee. Nice to meet...
Up for sale I have a completely rebuilt 5hp briggs engine for sale. Block was blasted and honed, good port job, milled head, great little cam, tillotson hl314 gas carb, fuel pump, strait pipe, new breather and tube, powdercoated tin and all stainless bolts. engine only has break in time on it...
I've run this engine less than an hour. 5 hp Briggs & Stratton flathead with Candy Blue powder coated tins, all stainless steel bolts, billet rod, slapper cam, Tillotson dbl. stack carburetor. Puts out appx. 12 HP.. The yellow oil fill caps were changed, otherwise it's as shown in the pics...
Any tips on building minibike trails through the woods?
I have 5 acres of wooded land to work with. I built a smallish loop, but I don’t like it very much. It is too short, (takes about 30 seconds to do a lap), too bumpy, and too boring (4 left turns and your done). It’s a let down...
Teal bc/cc paint, fresh h60, new wheels, tires, tubes, axles, chains, sprocket, brakes, seat, tank, rechromed handle bars etc etc...
$900 no trades, will not part out....reasonable offers considered
Trying to raise a little money for some other activities. I have a real Honda GX200 I built up and put on my Serengeti Puma. It runs great and might have 10 hours on it. Never been raced or run at extreme RPMs. The carb and coil are stock, but pretty much everthing else was upgraded; piston...
pred clone
air cleaner kit
jetted
billet connecting rod
billet flywheel
gas tank and recoil are powder coated white
recoil is Black
gov removed
asking 300.00 local pick up
340.00 shipped
need a pic send me a pm:thumbsup:
i have a 5 hp flathead for sale...
has a custom 3 stage header
.10 over flat top piston
arc rod and new bearings
shaved eyebrows
welded lifter valley
doubled valve springs with alinum retainers and locks
gastank mounted tec style
big cam
billet lifters
hardened valves
shaved down...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.