built

Ha Ha,,, Cement wall verses mini bike. Check out the forks they look brand new,:1orglaugh: mini bike

I am looking into what engine I want to install on my street legal 63 Simplex Sportsman Senior. The bike weighs 175lbs and I weigh 250lbs. How does a built GX200 clone compare to a stock Honda GX390? I would like to run 50mph on the roads. I will be using the jackshaft on the bike...

Okay giving a deal on this just had the rear end done on it 2 weeks ago and go's great, have over $2000.00 in this so we learn some times the hard way but i'm willing to let it go for $800.00

had built this last spring and the darn bearings just wouldn't hold up for some reason and now i just had the rear end redone and goes great plus new chain its a 16hp atv bike now, no slouch for power will do 35 to 40 MPH has true comet clutches on it 44 drive and 40 driven I will ship but will...

I bought this bike just for the wheels, which I believe are "Hands" I only saw pictures so I crossed my fingers hoping they were in good shape. It arrived today, and luckily they look like they are:thumbsup: In the pics it looked like maybe it was a modified production frame, but its scratch...

Here is a chopper I was asked to post for a friend.It was all custom built. B/S animal engine Lots of alum and custom parts.If you need more info let me know and can put you in touch with him. $2500 Thanks

My friday find ,was told this was built some time in the 1950s . thought i would share ,ejoel

Just got this engine on a Harrison Wildcat. It's a GX160 with a billet .273" cam, chrome valves, 15# springs, 22mm Mikuni carb, custom header straight pipe, no air filter. Carb is jetted for a 6.5hp GX190, and should really be rejetted for this engine. It runs good but is a little doggie from...

Customer from work heard I Build mini's as a hobby and asked me if I wanted an old frame he found in the back of his garage... I said sure, bring it to the store next time your in. Yes I was excited when he brought it in!!! LOL!! It was rusted pretty bad, chrome rims were rusted as well.Tires...

hey guys im looking for a hi performance gx200 for 350-600

I built another clone motor with a chain driven ford smog pump as a supercharger, draw through style. pretty dangerous, I call it the "mangler" wanna see a vid of it running?:evil_laughter:

Ok i've had this a while and hasn't been ridden maybe 5 miles there was some issue on rear hub does have new bearings there now and needs drive chain other than this i have a total of 1865.00 in it i'm sacrificing a terrible loss but i need to the money to help my father inlaw on a house payment...

305 BLOCK STD BORE DUAL VENTED BLOCK ARC ROD TRUED CRANKSHAFT OUTPUT SHAFT TURNED DOWN TO 3/4" ARC ADJUSTABLE FLYWHEEL FASTER MOTORS WELDED PORTED HEAD WELDED REINFORCED ROCKERS COMP CAMS DUAL SPRINGS COMP CAMS PUSHRODS DYNO .356 CAM POLISHED SIDE COVER ACCEPTS TILLY OR IBEA 1.06 CARB INCLUDES...

Custom TriRod 3-Wheeler ATV | eBay 1975 Custom Built TriRod Custom TriRod 3-Wheeler ATV Image not availableZoomEnlarge Mouse here to zoom inPlease waitImage not available Sell one like this Item Location: Woodstock, United States Time left: 1 day 7 hours...

I have a custom built motorized bike that i am looking to trade for a built motor...like a Briggs or other...Bike value is 1600.00 with all custom parts. Would make a hot pit bike or tow bike. Tell me what you got...

I have built a race bike and need a little help on performance mods and tuning. The bike ran hard when I had the old 50 tooth sprocket on the back wheel and a shorter exhaust. Got it back running tonight and noticed the touque is not the same. Could it be the new exhaust is tooooo long/ The...

BUILT THIS AS A BACKUP AND DIDN'T USE IT NEW BUILD RUN IN TIME WITH LOW PRESSURE SPRINGS AND 10 MINUTES ON THE BIKE NEW HONDA BLOCK NEW HONDA CRANK NO GOVERNER VENTED BLOCK AGK STANDARD LENGTH ROD HONDA FLAT TOP PISTON AND RINGS AGK PORTED/MILLED BIG SS VALVE HEAD 14cc .010 GASKET NR 285-0607...

Trying to get my Lawn mower running and have no vacuum coming out of the fuel pump in the line going back to the tank. I have 5" of vacuum from line coming from the crank case and then going into the bottom port of the fuel pump. I'm assuming 5" is enough from the crankcase but don't know...

freshly built, rings, valves, arc rod, Crane 270 cam, 3hp steel flywheel, bearing side cover, new mikuni carb, milled head $250+ship "To state the obvious>>Bike not included"