catch

PVC Catch Can ver. 2.0

https://www.youtube.com/watch?v=r4flZad3vYM

35$ shipped for both all hardware included forum image hosting capture free upload pic upload

I installed a fuel pump on my drag motor and I ran pulse side of the pump to the catch can breather ( where the filter would go). Started it up and it seems to be getting too much fuel. Should I tee off valve cover pulse line and put beather filter back on?

hey, I want to get the strut mount catch can, but I didn't want to install it in the back by the tire... where else can I mount it? I was thinking maybe in front of the engine, or where the rear fender mounts in front of the tire

So i really like to reuse things. I like to take things and use them for a different purpose... ive saved all kinds of crap to use for something else, and many times has come out better than anything i could have bought from the store. so I have some stainless steel water bottles ive been...

Well this is my 7000th post :doah: only a little less than 19000 more posts to catch Buckeye :laugh: I can only hope to get another 7000 posts :thumbsup:

Got all my work done a little early today ,weather was nice.So I dug out my Tri-Sport TS130 that had been sitting all winter and got her started. Next I got my daughter & son-in-law convinced we needed to take them all out for exercise. We each got a turn on each one and had a blast ! Of course...

Bought a new catch can for go kart with a Briggs Flathead, Old can had a inlet for hose and a outlet with a filter clamped on it, looked to be homemade. The new one has a inlet for the hose and then another hole with a elbow fitting, can I hook the inlet hose up and just plug the other hole up...

stuff to add .. fuel line,fuel pump, top plate assembly for both throttle and fuel pump Question... Can I place a T in between the new fuel line of the stock breather hole in the valve cover & new line & a catch can ?

computer blew up right after Christmas. finally got a replacement & hooked up. a lot of catch up reading to do:laugh:

bigger catch can for sale $20 shipped :thumbsup:

I'm trying to get hold of some of these rockers. I can't believe how hard it's been I have been to a few shops and I can't catch a break. If anyone knows how to get them please post a link in here

Does anyone know what size fuel line i need to but to connect the catch can to the valve cover thanks

I try not to push them too much, but this one was catching air at my place a while back: Jumping a Bonanza/Lil Indian Back-Tracker - YouTube

Got a bit of pretty stuff for my build...ebay (like $40 bones)of course,,,,Chrome oil catch with top breather ......I know its overkill but it fills the void in the frame in front... Had to make my own brackets and it will be hooked up to intake and valve cover for venting..

got this at the dump today. Caught up with the owner before he tossed it. said it ran over the winter. I think its an HM80 Tec. Has double indian head tires too. Not bad for freeeeee.

just loaded up some pics....