Tecumseh shroud mounting plate, air cleaner assembly & front tin from an original white paint small block Tecumseh. Could use some fresh paint but the parts are very clean, no rust or pitting. Nice mounting plate, has the mini bike throttle holes in it.
$25 for the parts...$14 to...
Real nice Tecumseh small block recoil and complete air cleaner assembly . Recoil works perfect. No dents or rust at all...very nice I was saving these for a high grade restoration.
$35 for the parts + $10 to ship Priority Mail...$45. Paypal only.
tecumseh oval air cleaner on ebay
Tecumseh Engine Air Cleaner Assembly w Filter for Minibike Lawn Mower | eBay
this is a good deal if you need one for that special project. No it's not mine, I saw it tonight and posted it because these are so hard to find.
i want to know if you can spray carb cleaner on a briggs while its running or without having to take it apart.
some guy told me to buy carb cleaner and turn on motor spray a little here and there while running engine
also if anyone knows how to clean the spark plug hole without taking motor...
Tecumseh Air Cleaner Cover 30585 New OEM Yerxa's Power Equipment Since 1938 | eBay
this is a great deal on these hard to find oval covers, I got two of them but there is still one left
Alright, I've been searching the forums and these are the parts that I've come up with.
My question is will these work together on my new, otherwise stock, 212 Predator, and do I need anything else for it to work/run correctly? Besides longer carb studs that is. Told you I'd been...
Carb never run by me, owner always drained gas and engine it came on fired up and ran but never tested long or under load. Needs cleaned and rebuilt. $40 shipped with air cleaner assembly, has used filter that is not too bad.
Like the title says, I want a stock gas tank that sits on top and the stock air filter set up for this 13 hp motor. I figured someone might have it available after an upgrade and I want to put this motor on my tiller so stock stuff is a-ok with me and preferred actually.
Thanks so much...
Only happened a couple of times I've had carb apart a few times but this morning I checked it and she did it again....fired right up puffed some blue smoke she running to rich?it holds a perfect idle I've checked the float level numerous times...input appreciated
Has anyone used a ultrasonic cleaner for cleaning out carbs that are fill with varnish,residue that the carb soak can will not remove?Thinking about buying one but would like some feedback on them before I buy one and find out it was not really worth it. What size would I need for carbs and...
Hello, Im looking for a air cleaner cover and filter for a Honda 4.5hp GX120 engine. Does anyone have one they would like to sell? I can pay with PayPal.
Or does anyone know where I can get one off the internet?
Thanks
These were made for early Briggs 5 hp lawn mower engines.
Foam filter not included (part number 270447)
5 3/4" Long x 3 7/8" Wide x 1 1/2" Tall
Asking $15 for both shipped.
California
Paypal
I just wanted to share a nice looking low profile K&N style filter source. It fits on a stock briggs pulse jet carb and should fit a Mikuni but haven't checked it yet. The website is ADA Racing, the over height is 2", here is a picture of it on a briggs and a link to the site.
Pocket Bike Parts...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.