fell

Put on a new clutch, went for a spin and chain came off. Just curious of a few things.... 1. What should the chain deflection be...do you run these on the tight side? 2. Should the set screw be used on the clutch or should it float a little without it? 3. As for the chain, what are...

I just created the account, now I will figure out how to post pics. I've been tinkering on my baja warrior, and just noticed a random thick washer laying on the ground. I don't recall removing it from anywhere, so I'm hoping someone can identify the part and tell me where it goes. The...

Are you American? Mini bike. :laugh::laugh::laugh:....:out: Prepare your self for a history lesson. I will be the narrator on this magical tale. It all started in 1776 when America descended from the heavens. Three things fell from the sky that year. 1. The first thing that fell was this...

The first one was minor but I never look at those damn ads but this one was interesting to me it was just a simple key carabiner thingy but I wanted one from bass pro shops. $9.99 Stainless steel and the S-biners have a twist lock so they stay put. The other one I was just surfing around...

Hi , Have been trying to call Glen Baine for several days can not get a answer or call back anyone talked to him ? I know he had his hip worked on . Need to talk to him

I need to know the name of this little screw that fell off, I need to replace it but need to know what to search for fist. thanks and its a power sport 5.0 Tecumseh

My Harley had a growth on his nose so we took him to the vet on Tuesday and the Dr wanted to remove it, so of course we said yes. He went in the very next morning, they couldn't remove all of it as it was too big :doah: they did a biopsy and sent him home :thumbsup: I should have shot some video...

if you guys want to know a govenor falls out at about 4900 mine fell out today got a micron 4 tach to see if i needed a flywheel and rod 4900 was all i could get out of the predator. its ok im putting on a clone anyway :laugh: :thumbsup:

hi my yellow clone exaust studs fell out! i was riding and then the exaust was gone. i tried to remove the studs fron a old parts motor, pb buster and vice grips stripped them. should i mail order new studs for $2.00 and $10.95 shipping or get metric 1" BOLTS at lowes?

I Have a home made filter on a 5hp briggs flathead with the in tank carb set up. My son went on a long ride and the air filter must have come off and is missing. The engine is sputtering now. Where do you think a piece of dirt/grit would lodge in the carb first after going thru the air...

Long story short, I sat my tec in the MiniBike frame that was on the table and when I turned around the engine fell out the frame off the table to the floor. The carb cover was bent up and when I took it off I found that I had broke the manifold, but I already found one on eBay and it will be on...

:out: need rear shocks and front fork assembly info for "98 Aggie" mini

yep, took out one of my customers bike after working on it, i had just done an oil change and wanted to run the bike with fresh oil, i got onto an empty street and went a little faster, i had used safety wire to hold the choke in place, a section of it got caught in the return spring and held...

i just purchased 4 mini bikes for the bargin basement price of $150. problem is, i don't know much about vintage mini bikes, and 3 of 4 bikes are completly disassembled. I was hoping you guys could help me identify the models so i can figure out which parts go with which frame. Any and all...

i just purchased 4 mini bikes for the bargin basement price of $150. problem is, i don't know much about vintage mini bikes, and 3 of 4 bikes are completly disassembled. I was hoping you guys could help me identify the models so i can figure out which parts go with which frame. Any and all...

i just purchased 4 mini bikes for the bargin basement price of $150. problem is, i don't know much about vintage mini bikes, and 3 of 4 bikes are completly disassembled. I was hoping you guys could help me identify the models so i can figure out which parts go with which frame. Any and all...

Juts swapped out my stock HF plug with a used ngk from my saturn sl2....what a difference so much more responsive throttle wise sounds better sounds healthier so awesome.:thumbsup:

I HAVEN`T BOUGHT ANY THING FOR A COUPLE WEEKS BUT THEY KEEP POSTING THING ON C/L TEMPTING ME YOU KNOW,,,I SHOULD HAVE CALLED MY SPONSOR ,,,OK SO WHAT YEAR HOW MANY H.P IT HAS A PANTHER ON THE SIDE I LIKE THESE OLD ENGINES :001_rolleyes:

Thanks to a good friend here at OldMiniBikes I picked this up over the weekend. I couldn't resist and the drive was nice as well... serial 2899-D

A guy dropped this off by my house on his way to work, the price was $30 and he said he had it since he was 8 when he lived in Spokane WA, he gave it to his cousin who did a few mods (kick stand & Jack shaft /welding) but the rest is all stock. He got it back again and was going to restore it...