greyhound

Not intending to double-post, but I asked in the Honda clones forum and it was suggested I try over here. I picked up a used 2.5hp mini bike this past weekend for my boys and after closer inspection, I saw the throttle linkage was a bit messed up (I knew that) and the governor rod and...

Hi Folks, First post here, but I've been reading a lot. I had a little 3hp mini bike as a kid and had an absolute ball with it. Recently I started looking for one for my boys...well the older one at least. Well, this past weekend I saw a no-name for sale ("vintage" look -- sort of like...

Had to take a slight pause from the minibike project that i started for my little nephew but now i am on track especially now that i scored on 2 almost new blue gx200 clones for at little less than the cost of my HF predator i recently bought but now returned :biggrin:. Originally i was suppose...

So after much reading and debating i have decided not to buy the new predator and to rebuild and upgrade my almost new hf greyhound blue 6.5 clone. Here is how i am going to attack this build, feel free to add pointers and suggestions...or just to call me a retard. this is my first power build...

i have a 5.5 titan and a 6.5 greyhound clone. i want to build one of them up to a monster engine and i dont know which one i should use. obviously the greyhound is bigger but is it better for performance mods? what i mean is which stock engine is a better starting platform to make a powerfully...

whats the difference between the hf 6.5 predator and the older 6.5 greyhound that they used to sell? is their a big difference in parts? how well their made? and which is better for a mini bike. thanks. travis123321

Where can you buy this online still? cannot find a valid link to purchase the motor!

6.5HP Honda Clone engine 196cc Greyhound i was holding onto it in case i got a machine to put it on. but i need more funds so it has to go.

Looking for a 6.5 hp greyhound engine..got cash in my hand pm me

I know I am going to regret selling this motor but I could use the money for something else. I have a Greyhound (Honda clone) motor for sale. It is a horizonal shaft which is 3/4". It is literally about 1 month old. It has not been used on anything yet. It was mounted on a mini bike frame...

I am thinking I may need a rejet of some sort, but what do you think? Motor is completely stock, with a helper spring on the governor spring, stock air filter and airbox, stock exhaust pipe but muffler box is broken off. Essentially just a closed end pipe with 3 holes drilled in the side of...

We got the harbor freight 6.5 greyhound and want to make it rev a little higher. What RPM would be the safest RPM to go to if we just added 18lb valve springs. Were trying to avoid spending money on a flywheel and a rod. Pics of bike below :scooter:

I bought a Predator 212cc engine for comparison to the discontinued Greyhound 196cc engine. I will eventually install it in one of my DB-30’s Dimensionally the engines are almost the same size. I measured them side by side (+/- 1/8”) I don’t have a scale but they “feel” about the same...

NIB, but was from clearance rack at HF. $75 ftf in L.A. Will ship on your dime.

Ok i picked up the 6.5 hp engine from harbor freight for $63... I am going to mount it to a rack like this: Google Image Result for http://www.roadcycler.com/wp-content/uploads/2008/03/tubus-logo-bicycle-rack-2.jpg I am going to mount this to a old gt interceptor bike. The question I...

Hi guys. I've tried to find an answer to this but it isn't happening. HF 6.5 clone. Turning idle screw doesn't do anything. The black lever on the carb that presses against the idle screw doesn't contact the screw at idle. Or if you like, the governor rod is holding the carb open at idle...

I live in lancaster ca and have harborfreight add for march with 89.99 clone engine plus theres a crappy magazine called westways that i got a 20% off coupon in that doesnt expire untill april and ive had it for a month just thought id let know:scooter:

Has anybody used greyhound to ship a large package before ? And is there any pros or cons I should be aware of?? Thanks Mark

Hello All, This is a really nice site. I'm a long time Mini Bike lover who lives in Rochester, N.Y. When I was a kid, starting at about 13, I built a number of bikes, mostly with "Power Products" 2 stroke lawn mower engines on them that we would get from the local town of Greece dump. The...

Well I finally got my first clone engine , it is a new Greyhound 6.5 from Harbor Freight that came on a three wheeler that I bought . It seems like it runs good and has good power .... but do these engines last or are they a short lived engine ?? I always said that I would not have China...