install

ok here we do a install and oiling of a max torque clutch .this will be how to mount one using the set screws . ok check that the key fits in the slot on the crank and the clutch. use a small rat tail file to remove any burs , or rust in the slot . the key should slide nice free no binding ...

how do install the throttle linkage on this engine gx200 HF clone... also please look at my other thread http://www.oldminibikes.com/forum/honda-clone-engines/45128-how-install-6-5-hf-gx200.html

I have a mini bike am trying to install the 6.5. Where do I start mount it get a clutch and there??? whats the cheapest website for performance parts?? is it worth putting an aftermrket pipe and air filter?????? Also whats the best clutch in the 25-45 range?? what do you guys recommend getting...

this is my mini bike will the engine bolt right in?? what all do i need??? i just picked up the motor last night. how fast would it take me if i weight 220???

What's up guys wondering if anybody has the 6.5 install cd from their kit and is not useing anymore and would like to pass it down ill cover shipping let me kno thanks

Putting together a small PTO bearing engine for my Lil Indian resto. I will be machining down a std. crank so I can use the ball bearing. The small Briggs bearing I got is shielded on one side and open (can see the bearing balls) on the other side. Which side of the bearing goes to the crank...

I got this kit : Modified Throttle Kit, www.bmikarts.com : BMI Karts & Supplies : Go Karts Parts : Racing Go Kart Parts : GoKarts : Versailles, Ohio : USA : Indoor Track : Tips but i'm unsure how to install it properly. does anyone have any pics that may help?

heres a couple of pics of a band brake install. I reversed the band and mounted it down towards the motor mount plate. It gave me more clearance around the clutch to mount the cover

set up on their minibike? The jackshaft thats used on the baja. any pics?

I am looking for a doodlebug mounting plate to install the 6.5.. I would love a used or new one.. If anyone makes them here or knows a good link please let me know.. Thanks.:thumbsup:

My father and I picked this little Baja DB30 Minibike up at GI Joes when they were going out of business. They had them all the way down to $150 new! I couldn't build one for that so we purchased one to play with and bring with us to fly-in events ect. Right after purchase we took it up to...

i bought the motor today and did the modifications to it (removed governor, installed return spring) All i gotta do is drill the holes and put it on and go!:hammer::grind::pimp::laugh::censure::scooter:

I just received my kit from Chris yesterday and I'm gonna put it on today. I was wondering though if I should put rubber washers on it. I seen somebody do this before and it might be helpful for the vibrations. Do yinz suggest I do this? If so, where do I get the washers? Anything else I should...

hi,I bought a 6.5 hp engine to put on my baja db30 but i have some question.do i am obligated to have a second plate or i can just put my engine on the first plate. i want to know how you do to fit your motor on. it will be very appreciate if somebody can do me a (schémas),i don't know how...

I am new to mini bikes and was wondering when installing a petcock should I use a Teflon tape on the threads or something else or nothing at all? I Didn't want gas leaks so I thought I would ask. Thanks, Bob

Ok, please dont kill me for bringing this up. I will be getting my clone tomorrow and putting it in my db30. I want to know what the best throttle linkage method is, because i have seen quite a few. Also, what else should i expect when putting this in the DB? I got the mounting plate so it...

does any one know how to install a tac or a speedometer on a b&s

How do you install a kill switch ? Right now I'm using a bent wire that pushes down on the spark plug on a B&S 2HP. I'd like to install a switch mounted on the handle bar. Thanks in advance. Tim

hey guys first post here! what an absolutely awesome site. What i got is an old blown 5 horse briggs that i removed and bought a 6.5 greyhound clone. I need to know if the clutch from the briggs 3/4 shaft will bolt on? Also i need to know how to configure the throttle rutorn on the carb and...

I received my Harbor Freight 6.5 today and mocked up the clutch on it. When pushed all the way down, there is a slight gap of where the bolt will go. The clutch will be able to slide back and forth on the driveshaft. Is this normal? Should I put a washer behind the clutch so it is even...