intek

Is anyone running a Briggs intek with a tillotson carb? I'm trying to figure out which linkage kit I need to order.

Does anyone have pictures of what the Intek 206 throttle linkage is SUPPOSED to look like? Mine does not seem right and the paper clip looking spring doesnt seem to do much. Or a picture of how they have theirs hooked up to a throttle.:hammer: I ordered a replacement carb cuz this one floods...

One of the newer ones, no adjustment in the carb SO it runs like shit :hammer: I am including an older carb that has the idle fuel adjustment. It is from a flat head, so if you wanna use this original retarded looking air filter, you gotta change out the choke shaft.. :shrug: The throttle...

Does anybody know, will the Animal Walbro manifold work on an Intek using a 22 Mikuni?

Hi guys, today a bought a used intek 206 with a premier magnum clutch, header pipe and filter for $100:smile:. I already have an animal stock rod and cam. Now my question is, are the animal cam specs different than the intek cam? Are the intek stock rod and the animal stock rod the same...

Hi guys and gals. This is for those of you who have experience with these small engines. If price was equal which one would you buy, an intek 206 or a predator 212? It will be used on a drag minibike (not too serious) and it will get a billet rod, flywheel, header. The rest will most likely...

1.25:1 Int -1.35: Exh or vice versa... used $75 plus $6 shipping will take good shape Max Torque tav clutches towards trade..

Help I got a dead Intek 6.5 horizontal shaft in a trade, i put a new head gasket on it and it runs really well, now I need a muffler, out of five mower shops near the house not one has a used muffler or new. If you got one used laying around send a pic and price let's do a little biz. thanks...

billet intake for a tilly...Briggs animal or intek... will not fit a WF head.. $25 + $5.50 ship

This engine is new unused I took the tank and throttle off to fit the engine into a bike and now that project is gone. I do have the gas tank but the linkage got lost when I moved out of one shop. The price is $175.00 plus shipping from Portland, Oregon 97229 I take Pay Pal and ship by USPS...

After messing around with my buddies old mini bike, I knew I had to get one for my little brother. I picked the frame and motor up separately from the same guy. The gas tank is to big and the rear rim/tore is shot. The motor was not running when I got it, luckily it was just the kill switch...

looking for a good used or new intek valve cover

nice cover, good bearing, dual vents, new oil seal $25- plus ship

want to buy briggs intek 6.5 hp stock carb and coil

hey guys. i tryed to bypass the governor on my gokart (briggs intek 206 iron sleve 6.5 h.p) and i ran the throttle cable right to the carb but it will not start unless i hit the governor arm and it acts like im hitting the throttle when its not even connected to the carb its so weird its like im...

hi everyone i am new to this site, but here's my main qustion with tav 2 fit onto the inte 190 directly with modding?? there's a weird casting on the side cover tht comes out about 1/2'' but the mounting holes are flush with cover.... help plz!!!!!!!:confused:

i recently put a filter and a volocity stack on my 6.5 horse briggs intek motor and it dont wanna run good at all... raw gas comes out of the carb and seems like it chokes out....but i put my stock stuff back on and it runs good??? whats the prob

so i maight be gettin 2 briggs intek 5.5 hp motors and was wondering if theys some mods for these motors? one will be used on a gokart:shrug::grind::confused::blink:

Im building an open motor out of a 6.5 briggs intek 206cc engine that i had. parts are used but in good condition. crankshaft with gear, rod, std piston. $60 shipped.

I am looking to buy a used billet rod for an intek 190. Also looking for a used animal intake and carb,pipe,cam and flywheel. Thanks pm me with parts and price.