rods

We are pleased to announce that the wait for the New Raceseng S1 and S2 aluminum push rods for the Honda and clone 160cc/200cc motors is over! They are now available for purchase in our online store and ready to ship. Below are the links to the product articles with all the specs and links to...

Ok, so no one is producing these right now. Does anyone have any idea of what it would cost to produce them? We all know that tec rods have a reputation for failure, but man, having a billet rod for the HS40's would be great IMO. I am not a machinist, so I have no idea of the time involved to...

I've got a set of 350 rods that are re-con'd and balanced. I'm curious as to what kind of abuse(HP) that they might take? If I had to guess, I would say that they are 1980-1990.

i bought a few rods that i thought would fit my h35 engine.. this was before i found out rupp had different parts in the h35 than the normal version... anyway these should fit standard h30-h70 i think, please dont buy unless you know you need these as i am only 80% sure!!! part # is (32875) i...

brand new, these are the ones you cut to your desired length for extremely milled heads, ratio rockers, ect... $25 shipped within the U.S

hey guys i have about 150 sets of billet lifters for the 5 and 4hp flathead 10.00 per set. also have 20+ raptor 2 and 3 rods new in the box. say 5.00 a rod :thumbsup:

hey guys i have 5 stock length used billet rods for the 5hp briggs. 2 arc, 2 hortsman, 1 WMS all come with rod bolts only. i have new bearings in stock, 12.00 for std. and 15.00 for undersized. 35.00 each shipped lower 48 states...

i just bought an ARC rod 3.875 with replaceable bearing and was wondering if i should use assembly lube or just 30w oil on the bearings and wrist pin. Also does it need to be broken in or can i start reving the hell out of it. i have a 5hp B&S flat head motor with a milled head, no governor...

I installed a ARC rod in my 6.5 clone, but i didn't have a torque wrench :doah: so i just kept tightening them. The last time I tightened them, they seemed easier than the last push of the wrench. I am afraid it will blow up... what should i do? On a side note. I bought a throttle hook up...

Me and my brother are realy big trike fans. He has got two Tri Rods, and ive got a realy cool lookin Tri Cart.. Anyone else got any?

I thought I had seen where someone is making these in a high strength material for the old Tec HS 40 and 50 motors. Anyone recall where I might locate a source for these ?

looking for used billet conecting rod and oil dipper in good shape for a decent price for a stock 5hp i/c briggs engine if you got anything send me a pm thanks! austin'

1 - used arc 3.875 billet rod 35.00 shipped 1 - used hortsman 3.875 billet rod 35.00 shipped

MDB i epect you will probably know this if no one else dosent but how do i tell the diferrence between a Raptor rod and a normal stock briggs rod thanks in advance

What is the difference between Raptor 1,2 and 3 piston rods?

looking for performance rods for my 8 and 10 hp engines dose any one make performance rods and pistons for tecumseh thanks shane

I grew up racing 1/4 midgets and they all had the gov removed, Dad just taught us kids to "burp it" and let it breath. Never a problem. I'm not sure but I don't think we ever lost an engine? And these were not Honda's like they run nowadays they where home built Connie's and we wound them up and...