setup

Anyone know if a small belt drive, rear mounted, hand clutched transmission (like on a harley) is available for miinibikes? Pete

So it moves both tires? where can I find some?? Also what is better when sprocket is on wheel and it moves one tire? Or when sprocket is on axle and moves both? Would it stress and spin slower since it turning both wheels? heres the kart

Could someone here (james_c or steve durham maybe) explain to me or better yet provide some pics of how the choke was setup and actuated on a RTS 340 engine? I have nothing of the original choke to go by. I did finally get all my carb parts together today and fire it up for a short easy ride...

I need some ideas on a gas tank for my bonanza I have this new tank I got from a member long ago ,to use it I will have to get a smaller seat witch means I need to move the seat mounts . I also was thinking of a tank from a flattie might work I think I have seen something like that on a clone .

Super Bronc Trike, Band Brake setup

I'm new to the mini bike scene and don't know much about them except they are cool.. just bought a new db-30 and reading that the motor is a turd..... looking into buying a harbor freight 6.5hp and want it to be fast.. what parts will i need for this engine to make it go at least 50+mph. Any...

Ok, I pulled the Tecumseh motor off my yerf dog and tried to put on the clone, the kart came with a comet 30 style TAV (no backing plate) The old motor had a 3" long shaft and used a 3/4" spacer on the inside so that the pulleys lined up, on the clone the shaft is only 2.5" long, if I dont...

UPDATE ON PAGE 2. STILL NEED HELP. I purchased this throttle linkage kit and cable from AGK. For some reason, I can't figure out how to get the throttle lever to operate properly. After installation, I tried controlling the throttle via throttle grip on handlebar, and it just gets stuck. Here...

Local 1/8 mile flat track, mini baja, that will remain fairly stock for now. There aren't too many rules, but I don't think people take it too seriously, so I have no intention of making it expensive, and showing up with a built GX200 (I'm shocked at all the cool stuff available). So I guess...

Yeah I have another T/Q question. This time about setting up the driven on my RTS. Since it was very corroded, I disassembled it, cleaned and reassembled it. The trouble is that I needed to use a puller to get it apart and when it popped I lost track of how much the spring was preloaded. Can...

Hello all... New to this forum, just wanted to say thanks to everyone who posts here, incredible amount of info... I have just acquired a 5hp briggs motor on a go kart setup...I go everything running but am unhappy with the carb setup...I took it to a small local shop and a guy told me my...

any one have a intake and carb set up for a 5 horse briggs motor? this motor currently has a tank mounted carb. this makes it an impossible fit for my build. HELP

how do i correctly put the linkage and springs on from the carburetor to the governor?:doah:

This was on a minibike that had sat in the mud for years and the frame was rusted out totally and I cut it up so no one would get hurt on it . The motor still ran and the clutch worked but the driven is missing parts and I am not sure what kind it is to research what is missing from the driven...

looking for the arm that the brake cable hook to goes on the splined shaft that operates the brake shoes dont know the size but i believe they are pretty standard i think the drum brakes are 4 1/2 inch

looking for a flywheel and stator/points for a hs40

how do you guys set up your rear tire with a sprocket do you guys buy those hub things or do you strait bolt it to it or what im:confused:

I ordered some new chains and slightly larger sprocket for my 2 speed but I procrastinated in doing it and they wont be here in time for this weekend (billetproof). When I put this together orginally I used the chains that came with the bike (the 2 speed jackshaft is a new old stick unit). the...

does anyone know what series this set is and if you can find parts to rebuild it (if its even worth it) and is this soposed to have a bushing on the clutch for the belt to ride on when its at idle. thanks

Hi I have a Manco mini bike and it has a band brake on the right side of my wheel. I was wondering if I can convert it to a disc brake? Would I need to buy a new rear wheel or what? Has anyone changed there band brake to a disc before? Any advice would be appreciated. Thanks