speedometer

I have a 1970 Rupp Roadster. It came stock with 10 inch wheels, but I'm wondering if it's possible to take the 12 inch wheels off of say a 1972 Roadster and put them on? I want to be able to use a speedo but I cant find any Veglia sending units made for 10 inch wheels, so I thought that 12 inch...

Anyone know who was the maker of the speedometers that were used for Heald Superbroncs as an additional accessory? Was it CEV or VDO?

ok i got this speedometer (i know its for a chinese mini chopper) and i put it on my gokart because i wanted the battery meter part of it.. but i want to know if i can get it to tell how fast im going.. its a kmh gauge.. heres a pic

So I have these two NOS CEV pieces for a minibike speedometer. I have the gauge itself and the gear which is driven by the front wheel. The only missing item I believe is the cable which can be had on ebay for something like $20 I think. Was going to use this for a project I am working on...

So I picked up this speedo gear and gauge. It will fit a 5/8" axle so I would like to try and put it on my Bonanza build or Superbronc. Both parts are a CEV. I don't know much about these so would I be correct if I am figuring that these were made to work accurately with only a certain wheel...

As the title says Speedometer, RPM, And Temp Gauge for $100. Its a Vapor Trail Tech. Although I'm not installing it on a a Mini Bike it would work very well for one. It comes with mounts that would allow you to mount it on the handle bar of any minibike with round stock tubing 5/8" to 1". It has...

I just got 1 of these. http://www.buyincoins.com/gallery/other/bike-speedometer-2-01.jpg I know a few people have done this before, But does anyone have the wheel size, calculations, codes, directions, and any other info that is needed? Mine didn't come with instructuins??? :out: China...

I was wondering, if I wanted to put a speedometer on my DB30, could I just buy one at canadian tire or something? Also, do you need a battery?

Showing instruments. As you can see this mini is basically brand new since I did in fact put these on when I assembled the mini bike. 12.5miles and less than an hour on this bike.

what are you guys using as a speedometer and how are you mounting and setting it up?

I have a speed kit for one of my bikes The speedometer and bearing are Marked VEGLIA made in Italy. I am looking For another bearing it is marked 16/11 or 11/91 depends on how you hold it is their any other bearing that Will work??? Are these veglia available Thanks

Anyone have or know where to get a speedometer assembly for my Superbronc? It doesn't have to be an original.

I bought and installed: LCD Bike Bicycle Cycle Computer Odometer Speedometer NR - eBay (item 180402633718 end time Jan-28-10 11:20:59 PST) Now when it asks me for my tire size the range is 60mm to 229mm I did the roll out on the bike and measured 44 inches. After doing some...

Would this speedometer work on a DB and how exactly does a speedometer like this work? http://www.bmikarts.com/shop/?cart=1940750&cat=271& :scooter::scooter::scooter::scooter::scooter::scooter:

Hello...I am looking for a speedometer pickup (that attaches to the front wheel) for my super bronc. It has 22x11-8 tires. Perhaps an old heald trike owner would work as well. Thanks.

hey is there anyway to hook up a speedometer on the baja doodlebug.

The attached pic is the manual for a 15 buck K-Mart bicycle 'computer'. It's a BELL F20 that attaches to the bars. Its main funtion is a speedometer. There's a 'pick-up' attached to the forks and a tiny magnet attached to a spoke. The computer reads the revolutions of the wheel. As there...

Are there any sorts of cheap, simple speedometer that can be used on a minibike? Would a regular bicycle one work?

If anyone is interested in getting a speedometer, odemeter, etc. for their mini, search for "bike speedometer" on ebay and you can get decent ones for $5.00 shipped. They can be adjusted for wheel circumference to be fairly accurate. It is true, they are made in China, but a nice and cheap...