Hello,
I am working on a Broncco T/C-4 and am unsure where the brake light switch mounts and how it is wired. Any information or pictures would be greatly appreciated.
Even brake switches for other Broncco's or minis may help me :confused:
Thanks!
I'm looking for a kill switch, I've seen and used the 10 dollar or so ones but I'm looking for something more durable and clean looking. Does anyone have leads to something?
Thanks
Here we go - dumb question number 1:
I want to keep all the stock kill switches on the Predator.
So, couldn't I just join the DB's wire A into the Predator wire connector barrel A?
And, the DB's wire B into the Predator wire connector barrel B?
:shrug:
===================================...
here's another newbie question,
on this new motor the factory installed switch on the side of the motor does NOT kill it. Ive had to choke it or shut the gas to stall the motor, how/why can that be malfunctioning? or how to fix? I think it worked the first two or three times. we've only had...
I am rebuilding a 3 1/2hp briggs and would like the little metal kill switch that attaches to the head tin and is flipped into the spark plug.:shrug: If you have one or know where to get one please let me know.
Thanks,Scott
This is a used stop switch for mounting on the front of the flywheel housing.
parts numbers:
690474 rocker switch and 495098s bracket
Asking $9, shipped, to lower 48 vis usps parcel post.
I just picked up a HF Predator 212cc.
Was wondering if someone here can show some pictures of the stock doodlebug kill switch and how EXACTLY it is wired into the new, black Harbor Freight 212cc engine.
The stock kill has 2 wires coming out of it, one is a ground and should be attached to the...
Anyone have a picture of a kill switch for a '71 Arctic Cat Prowler (small wheels) or better yet, a source?
I talked to Bob at RT21 in NY and he thought it was a triangular unit but hasn't had any in stock for years. The '72 Prowler had a red button integrated into the chrome twist grip...
I have several 2.5 and 3 HP B&S engines that have no lug or extra wire on the magneto. Can a wire be added to allow a On/Off switch to be added? If so,how so?
Hey guys,
I was about to head to the store to pick up some walnut contact paper for my kill swith plate as Derekbmn had posted on his 400X thread.
As I looked REALLY close, I noticed there is actually printing on it!
Faded out it reads "The Cat" , with "THE" above "CAT"
I was...
I got the new cable and switch, new wiring harness. The o-ring is to hard and would not squish enough for the switch to work. I found another o-ring made of a softer rubber so now the brake lights come on if you realy pull hard on the lever. I would like to have the brake light work with gentle...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.