tecumseh

Trying to get this muffler off. Is the nut reverse threads? This has been soaking for months and I still can't get it off. Any help appreciated. Thank you.

Does anyone know (of course most of you do) what the stock crankshaft length should be for a HS40 used on a 1970 Rupp Roadster? I assume it is ~2 1/4 inch, clutch side. Also, is the stock bore on a HS40 2.62 inch? Thank you.

Said, I would never sell this, So get me before I change my mind :laugh: 1973 HS40 with charge coil, Runs and lights perfectly, Bushing crank 450.00 US Plus the Ride / shipping You have no Idea how hard this was to post, LOL

Tecumseh H50 65540V {E} 5088R Crank is rounded? Bought a go kart years ago with this on it, doubt if it was original. Go kart long gone. Took off head to inspect the cylinder, (OK) but that was 20 years ago, Shed has since eaten the head, like a sock in the dryer. Great for parts or...

Pulled these off working lawn edgers 30 years ago, and been sitting in the shed. I realize I have a hoarding problem with Tecumseh, and this is the first step to getting more needed parts, (thought I was gonna say recovery? ha, your so funny): Their gonna need a going thru but nice cheap...

No relation to seller -worth all the money .Should bring $400 plus-Came off a Rupp Vintage minibike Rupp 4hp Tecumseh | eBay

$85 shipped, ONLY fits the HS50 engine, it is an NOS take-off part that has been polished.

Hello OldMiniBikes, I don't know about You but, I have had a hard time finding A Exhaust Header blank. So I finally find a blank from a friend. Correct blank to build a Header for a 4hp Tecumseh. What a thin 16 gauge POS is what is but, it is a perfect template. So I checked today with an outfit...

to good home, pay the shipping 6.80 flat rate envelope? or pick up check the numbers, I don't remember what they fit, extras from a package deal...

I'm looking for a 2.5 HP tecumseh preferably a 69. For a 69 Rupp Banchi, radams7425@aol.com

Offering some multiples/extras as I'm gonna do a built up H50 instead for one of the bikes I am building. Prices do not include shipping, its all small enough to go first class mail on its own so shipping would be $3-4.50 each depending on weight. Will of course combine shipping 1. Billet...

Like the title says. I have had this on the shelf for several years and have not found the bike to use it on, so here it goes. I added the lighting coil and flywheel had the crank turned down from 1 inch to 3/4 x 2 3/4 to use with a TAV. I will install the correct side cover and pull start, just...

looking for all tin metals around a hs40 engine

For sale NOS never been 20 degree engine. No box but comes with original owners manual. Dated October 1980 Masking tape still on fuel hose connector. This is going to be offered here before I list it anywhere else. I am asking $500 plus shipping. PayPal as friends is ok Text me with...

I just scored another pretty clean looking Tecumseh that is not running yet but should be tonight. its on a Sears snow blower and carries a Sears Part number on the shroud #143-696082 SER92900 Can anyone tell me what i have and what year? It has a 3/4" shaft so this may be what goes in my...

I've been looking for a Tecumseh for my Cat project and just picked this Toro 421. I know I will need to ditch the electric start, find the proper shroud, air cleaner, Throttle hook up, and paint it whit but I think I'm off to a good start!

I WTB (2) white original paint Tecumseh air filter housing the ones that show the holes on top. Not the ones with bell shape caps welded on them. (NO repaints please!!!) Thanks

Hello, So I'm working on this 1971 , 4hp Tecumseh in a Trail Flite. Been sitting for 25 Years, So I get a New carb kit. Replaced everything even though all it really needed was a new diaphragm. The Dam thing floods the intake & carb, New needle, Seat and seal. Had this carb off...

Hello All, as some of you know, I have gone back to school! My class project involves identifying obsolete, in demand parts, to go into production. This project would involve the sourcing of materials, the cost of production, and the potential sell through. You guys know I am a Briggs guy, but...

I'm posting this for sale here first before taking it to ebay. I'm setting the price at $500 cause Im sure it's a rare piece and collectable. I can't find any info on any others out there on the interwebs. Any questions please ask!!