wheel

This wheel Half was bolted to a Go Power wheel half on My Micro Cycle . It was behind the brake drum. Anyone ever seen one like it? Thanks

I am looking for a sidekick rear wheel. Thanks

I bought one months ago and finally got around to installing and see if a little bit too wide. Like 1/4 inch. Maybe there was more than one model through the years with slightly different dinensions?

Trying to put together another set of steel wheels and I am in need of a triangle flanged wheel hub. I believe the hub stayed universal with the wheel size, I think the bearing hub section needs to be around 3" long overall or something like that I will be pulling this one in the picture loose...

Powell mini bike rear wheel half / brake drum does have some cracks around the bolt holes $25.00 plus shipping. Also for sale on Ebay.

Powell front wheel half in usable condition. $25.00 plus shipping. I bought it with some other parts that I needed also for sale on Ebay.

Powell front wheel , no bearings but in usable condition for sale $40.00 plus shipping. I bought these parts with some others that I needed. Also for sale on Ebay.

Does anyone know the size of the two spacers used on the rear wheel? I figured I would make them myself but im having a hard time finding their size. Mainly the length. Any help would be appreciated. Thanks!

A friend asked me and i figured i would post it here. Looking for a rim and time combo that will work in a MBX11 shock fork. He wants to run a 8 inch wheel to bring the front end up some. Thanks guys and gals

Hey Everyone, I have a set of original MTD mud bug wheels hubs. They are 1" bore with a hole drilled through to pin it to the differential axle. I am selling because I replaced with a new set since I bent one hub removing it from axle. During my 1 week battle I did saw a small tension...

A friend gave me this wheel. Looks like an old craiger. It's a 6-inch split wheel with 5 bolts. Would just like to know what it is so I can blast it with walnut shells and polish it up and find another for a front wheel.

Has anyone got a Motovox rear wheel for sale ? With or without the sprocket and rotor. I think DB wheels are also the same....needing a rear wheel. Thanks in advance ond.

Does anyone know if the Motovox rear wheel is the same as a DB rear wheel ? Thanks ond.

Does anybody have a good photo of the rear wheel? Mostly looking for a good photo of the rear drum brake set-up. Thank you for any help.:thumbsup:

I have a 20 spoke hub with rim that looks like it has grimeca brake plates but I can't find any markings on the plate the hubs or the rims. I'm looking for information and possibly replacements for the restore I'm doing. I can't find any info on 10 inch 20 spoke wheels.

Anyone have one laying around collecting dust? Doesn't have to be anything special.. Thanks for looking.

Need original rear shocks (Ceriani) , front 5" Wheel and upper fork wanted! Thanks!

Ok, I'm hoping someone has had this challenge. I can't find a rear wheel for my kids DB30S -- serial number starts with the LUAH... What / How did anyone come up with a work around? Thank you in advance for your knowledge and advice. Jeff

I am in need of a DB30 rear wheel with the disc brake rotor. Tire and sprocket are not important or needed. I know I can buy a new one but I was hoping someone would have a spare one to sell. Thanks, Doug

I just bought some Lomart Cheeftah mag wheels and need to mount a sprocket to it. I am not familiar with these, but I'd like to run a rear brake too! Looking for a 60 tooth, 35 chain sprocket...whatcha got? Cash, PayPal, trades, postage stamps...let me know what ya need!