briggs

What is the best high performance piston and connecting rod for my briggs 5 hp flat head engine

New, disassembled Briggs 8hp. I/C Dual bearing cast iron bore shortblock. 3/4 inch pto crankshaft. $85.00 shipped to lower 48. Thanks

$10 each plus shipping. $50 shipped for all 6

Briggs, Tecumseh and other miscellaneous bits in one lot for sale...NOS in package, unless otherwise noted. $60 shipped Included is: ARP hardware kit for 5-horse Briggs; never opened, but was placed in a plastic bag as the seal was compromised and so the extra bag helped keep things...

I just picked up a Rupp Hustler with the wrong motor. The one that is on it is a Briggs and Stratton 5hp. There are stickers indicating that it's a race motor. We're these stickers added or is it? Thanks in advance.

Hi, I have started making a frame for a minibike. The rear wheel is a 15" diameter (395mm), has a 70 tooth sprocket on it #428 pitch and size chain. The engine I have is a 3hp briggs. What gear ratio would I need for hill climbing and going slower for the kids? I can get a 12...

I'm selling an original throttle hook up that came off the original 5hp Briggs on a Powell Challenger. Includes cable clamp, clevis and return spring. Spring may not be original equipment, but that's what was used on this motor. Can be used on most older 5hp Briggs on any bike, but it's Powell...

Hey guys I picked up a 3 HP Briggs motor ,I got it running but come to find out the crankshaft is not threaded,is there a way to mount a clutch to this motor?

Hi guys Are there any truly interested small engine repair shops that can restore a vintage 5hp Briggs anymore. I am finding in my area that they want to just disguard the vintage Briggs for a $100 predator or suchlike and have more weed eaters and mowers than they can handle and are just not...

My first briggs rebuild for my little cat. Model 61102. 2 hp . I had it bored .010 , new piston and rings. Ring gap.011 . Piston to wall .003. This thing is tight! I need a wrench to turn it. Is this normal or am I missing something?

I need some help with hooking up a throttle on my 1970 3hp Briggs with a flo- jet carb. This is the first one I have ever used and I'm a rookie with them. Any diagrams would be very helpful. Thank you, Owen

Like the title says, 3HP. I am currently rebuilding it and trying to decide on the intake. I am thinking instead of the factory setup going with the Tecumseh H35 carb actually a imitation one but that style. I will be making an intake manifold for it. Any suggestions for or against this setup...

I got a deal today.

This motor is for derekbmn not sure what it is going on ... Usually a Briggs racing motor would be good enough !! But nah we can't have that .. So it will be gone through and upgraded . head work , bigger cam , springs , etc So this is what we are starting with !! Start breaking...

Can anyone tell me how to tell the difference between a stock 5hp. block and a Raptor block. I'm talking about just the bare block. Thanks in advance.

Picked up a 3.5 hp briggs today and was wondering if this is a ok motor for a mini bike? 3/4" dia. shaft x 2 1/4 long. New to the hobby, needed to ask people who know. Thanks. Engine ID.. MODEL 91202 TYPE 1016 E1 CODE 9806 10FA Oh I forgot to say it...

Price does not include shipping. This one will ship USPS. I have included the weight and you can run rate quotes yourself from zip code 83864. PM me with any questions. Thanks! Large lot of custom cams/ parts - $75 What I know about these is that at some point they were exposed to moisture and...

So I need to stroke my stock b&s crank to accomodate fire this 3.375 rod and my .565 compression height piston I have, and I will need to have it offset ground .125 then have it ground down .030 to make a clean surface for the chrome, then chrome plate it till its exactly 1.0000". But do I need...

This wasn't a mini bike engine, but it's in really good shape. The original white paint has some black overspray on it. It might clean up with a little effort but I haven't tried yet. Seems to have good compression, spark is good. There are no bolt holes on the crankcase cover. What you see is...

Briggs and Stratton 3hp engine. I can get it to start on starting fluid but cannot keep it running. So it is going to need a carb clean and some fresh gas. Looking for $50 or trades for parts, like gx parts exhaust air filter, trail horse parts, round gas tank ...