crank

Just like Need a briggs 5hp briggs crank with threads cut in it, the rod and maybe a piston. Email pics to sublime_4406@hotmail.com Thanks Jeremy

Im looking for a real honda gx200 block and or crank.

I have three tapered/oversize cranks I'll be turning down to 3/4" and milling 3/16" keyways...also boring/tapping 5/16" NF threads in the end to hold clutches on... If you have any cranks you want turned/milled/tapped, mail them to me and I'll machine them all at the same time while I have...

I have three tapered/oversize cranks I'll be turning down to 3/4" and milling 3/16" keyways...also boring/tapping 5/16" NF threads in the end to hold clutches on... If you have any cranks you want turned/milled/tapped, mail them to me and I'll machine them all at the same time while I have...

What is your method? I've heard of people fabricating contraptions to lock the clutch side of the crank in place in order to properly torque down your flywheel. Anyone care to share their method? I do not have a welder, which I hear is very handy when making the contraption to do such a...

Is there any info out there for a step by step procedure of pulling the cranks to have a keyway cut. I have two 5 horse briggs with a 5/8" shaft. My cousin who is a machinist said he would cut the keyway for free.

Hey guys. I recently picked up a GX160 clone, for a steal I might add. The thing runs great, fits perfect, but it has a threaded shaft, vs. a straight slotted one. I don't have a local source for Honda engine parts, and the cost estimate for machining the crank seem a little excessive. The...

not sure what size, prob a 3 or 3.5 not sure at all. it has 3/4 shaft, had not tried to start it, but does have spark. the wind up crank starter works great. you just wind it up and hit the mehanical switch in front and watch it turn over. cool little addition to any vintage mini. asking...

I need a regular 3/4" crank for a Subaru 128cc 5 hp. It's one that looks like a ohv Honda. OR........ I have a nice running engine f/s that has a broken PTO. $30.00 plus actual shipping.

can you remove the crank gov gear or does it have to stay?

need a honda ohc 5hp i think its a gc160 with the vertical cylender 3/4 straight shaft. Also wondering if a clone one will fit?

Hope you guys aren't gettin tired of my questions yet... I always try to search them before posting but am not having much luck! Never done a briggs performance build, and this place is the best resource for good info that I've found. I just found a briggs IC motor for a good price. First...

My son has a doodle bug that is stock with the exception of a ProMod jackshaft (which we love, by the way). I noticed this weekend while lubing the cluch bushing that the crank shaft has about 1/16 inch or slightly more of play in it. It is not side to side, but in and out. That doesn't seem...

Is there a easy way to lock the crank on a 1970's 5 hp b&s to remove a stuburn clutch nut? Thanks.

Stud For Bell Crank

My Briggs has a 1" shaft and the clutch I have wont go on far enough to be used on my mini so I need a new or good used 3/4" shaft. Let me know what you got and how much you want for it or if you know of a site that sells the parts let me know.... I need to get this going for a show in a couple...

Hello everyone I hav an 5 hp b&s flathead and I'm in the process of taking it apart and I ran into a problem which I think that the crank case side cover bearing bit onto the crank shaft. So basically I've done all the steps necessary to take the side cover off of the block, so how should I free...

im new to this and dont know much about these Tecumseh's. i have the motor apart. flywheel is off. piston and rod are still in the motor. i have about 1/2" to 3/4" of play(back and fourth) in the crankshaft. is this normal? if it is not then how can it be fixed? new bearings? cant say when the...

I just got a replacement motor for my project but found one problem. The end of the PTO side of the crank is not threaded on the inside. The clutch that I have slides on with a keyway but there is a bolt that holds it from sliding off the crank. Is it possible to tap the end of the crank...

I bought a Tecumseh crank starter for my 1970 Rupp Kart (I thought it would be easier for my daughter to start). The problem I am having is the the recoil starting cup on the engine is too small to fit the hand crank start into it. (This is a 1970 HS40). Did Tecumseh make a larger cup size? If...