custom

don't need new ones, a little rusty is ok as long as they are not all bent up...these are for a custom build..

Well I finaly got him to bring that nanza here to EAST TN CUSTOM MINIBIKES AND BAD ASS EVERYTHING . The all new raptor I have built him is going on the nanza . The motor has a dyno 107ss cam , billet rod and flywheel . Also the new dual bearing block has had the ports cleaned up and eyebrows...

Custom Built Motorcycles Other | eBay

Thought I would share some pictures of my chopper. Predator 212, custom header, All Black except for some bling. John

Custom Harley Oil Tank I was gonna use for a Mini Bike gas tank. $45 shipped U.S. 48. Weighs about 10 Lbs. L=9 1/2 W=4 1/2 Comes with BLACK heavy screw in cap, shown. 3 outlets on the bottom, rust free since it only had oil in it. Light Hi-Temp Black Krinkle paint, If you want another coat...

Hi I built this over last few years but finally completed it this winter. It is blast to ride and you can even carry a small passenger. It does about 55 mph its quick. Its 100% custom built. I am very picky so this thing is built right it wasnt half assed. Must see in person to realize what it...

I bought a carb thats has no choke. Kinda wierd . I found a gas cap and it fit over the carb perfectly. I drilled 3 holes in the cap for half choke and put duct tape over it for full choke. Sent from my iPod touch using Tapatalk

Hi everyone, Up for sale is a bike I built for the 2013 build-off. here is a link to the build thread for it http://www.oldminibikes.com/forum/OldMiniBikes-build-off-2013/73158-open-class-dan-e-boys-enchilada.html bike is still in like new condition, not even an hour of run time on it. it's a...

I have had my Baja Warrior for a few months now, and recently it has been nothing but a money pit. It didn't want to start up one day, so I cleaned the carburetor out multiple times and it did start once, but after that it didn't. I bought a $70 carburetor for it and it still doesn't want to...

Hi guys and gals, I am selling my custom minibike. It was built by me out of .120 wall dom, tig welded and high quality parts. If interested send me a private message and we can go from there. Price is $1000, will ship only if you make the arrangements. Located south of Atlanta, Ga.

Anyone can be skilled and experienced and build a mini. I like to think that not knowing very much -at all- and having limited mechanical abilities will really bring a refreshing taste to a project bike. :shrug: There will be a lot of guessing, poor taste, costly mistakes, and overall bad...

A few friends and I have decided to set out on a venture of building 3 custom mini bikes build almost 100% from the ground up. We all are very much new to this and are hoping for all the help we can get. First off I would like to share images that we are using to roughly base our mini bikes...

Anyone out there know what this is?

Found this awesome looking mini bike chopper with a good amount of work done to it. Front and rear disc brakes, custom short exhaust pipe, etc. It looks very clean and also runs too! It's a pretty good deal to me, I'd though I would share it. custom chopper mini bike

Okay I sat and thought out a clutch system to replace a torque a verter it consists of basic things but I wonder if you guys think it will work.

Found this nice Manco Thunderbird in good running condition in Spring Grove, IL. These bikes only came with 3.5 HP - 4 HP motors, and this one is 196cc engine around (6+ HP), so it's a different engine. I'd thought I share this, I really like these Manco Thunderbirds, if anyone has anything to...

My mini bike was in a shop for a couple of days getting some small cracks welded on the motor plate and rear fender. They also bent my exhaust, so the exhaust wouldn't interfere with the frame. It performs and sounds great!

As I was looking on Craigslist for a cheap mini bike that I can work on and customize, I came across this Motovox mini bike going for only $150! It starts and runs, but from what the owner said, it doesn't run as strong as it used to. I'm assuming it may have a clogged carburetor or something...

Custom 1967 Rupp C350 mini bike

I have a custom made Taylor 100 chrome exhaust pipe that I'm going to sell. Fits HS40-HS50 It's not factory it's something we made when we built the CAT Twister trike I am working on something a little different that I am going to try so this one is available. Here is the one for...