engines

Mini Bike & Go-Kart Parts

  1. L.skynrd

    will a 7hp Tecumseh snowblower engine fit on a Baja warrior?

    Hey guys, I recently blew the stock 6.5hp engine on my baja warrior. Im in ontario, so I am unable to purchase a predator 212cc at this time, since I cant get over the border. I have two months to find an engine before I take my minibike on vacation. I tried looking for old generators or...
  2. B

    WTB: Clean Tecumseh engines.

    Looking for complete running: 1973 H35 Tecumseh engine 1969/70 HS40 with center fill tank. Engines need to have the original ID tags and must be for a mini bike. Any help is greatly appreciated! Thanks, Greg BBT
  3. creia

    What minibikes had Briggs engines with front mounted tanks?

    Lots of them came with the rear-mounted tanks with the "Pulsa-Jet" (diaphragm) carb. Did any come from the factory with the front-mounted tank and "Flo-Jet" (float bowl) carb? Which ones were they? Michael
  4. B

    WTB: 3 Ealry 70s Tecumseh H35 engines complete/ running. Need 3

    WTB: 3 Ealry 70s Tecumseh H35 engines complete/ running. Need 3. Looking for real mini bike engines only. Must be 1969, 1970 or 1971. Prefer intact and running motors. We will cover shipping the units. Any help greatly appreciated. Thanks in advance. Please PM me or choppercarm@gmail.com...
  5. E

    Two Sick 196cc Engines

    Now that I put a pred on my warrior I can start helping my son to get his up and going. He has 2 engines to pull parts from so hopefully he can get one to work. The first engine came off of my bike. I bought a new carb for it, and when you give it some gas it hesitates and then revs up...
  6. 72shriek

    NOS engines

    Any special concerns when buying an NOS Engine like an HS 40 that looks to be of 70s vintage. Do gaskets dry out and fail?
  7. G

    yellow jacket engines

    hey anybody else remember the yellow jacket briggs race motors?? they had stage 1 2 3 the stage 3 had a sunburst fin head and put out 15 hp!!! love to find info parts ect??
  8. E

    Lifan vs Predator Engines?

    Looking around it seems there is some differences in these 2 brands??? I found this surfing and seems to be a good price. Too bad no electric start. I am looking to repower an old 1967 SS12 Sears Tractor. The old Tecumseh engine had electronic ignition and the module has failed. LIFAN 1 in...
  9. E

    Lifan vs Predator Engines?

    Looking around it seems there is some differences in these 2 brands??? I found this surfing and seems to be a good price. Too bad no electric start. I am looking to repower an old 1967 SS12 Sears Tractor. The old Tecumseh engine had electronic ignition and the module has failed. LIFAN 1 in...
  10. jeffdubb8

    Who rebuilds Tecumseh - Aspera Engines?

    Can you guys recommend someone who rebuilds Tecumseh/Aspera engines? Someone who does good work and is reasonable. Just looking for a stock rebuild, no performance parts. I have Mike Clements here in Phoenix, BUT, he takes 6 months to build them, costs a fortune, and mostly specializes in...
  11. danford1

    What years are these Tecumseh engines?

    I have three HS40's. What years are they? Here are pics of the model numbers. Danford1
  12. V

    B&s engines nj

    I know nothing about these engines they came on bikes i bought and im not a briggs man. Not siezed for parts or restore. The tan one qill definitly run with a little love got it from my boss and he pulled it off some sort of equipment long ago. I also have another that comes with these not...
  13. V

    6 Doodlebug engines pickup only nj

    I have 6 doodlebug engines i know 3 run. One has no compression, the other 2 i never tried to get started. 100bucks for six engines pickup only new jersey.
  14. Fisher1983

    Engines and engine parts Briggs Tec Honda

    More goodies for sale, must go. 3.5hp Briggs, needs rings. $30 bucks. 3.5hp Tec long block, $30 bucks. Honda GC160 complete and running, $75 bucks. Baja 97cc with header, 2500 clutch, and carb work, 6hrs run time, great running stocker, $60 bucks. Briggs 5hp parts: Make offer. block, needs...
  15. markus

    katcart stuffer intake for Power products AH engines??

    I picked up a couple of NOS Homelite 4 pedal reed cages that I will be putting fiber reeds on along with one I already have thats going in a Westbend 700 with a cloned go power stuffer. Since I will have some spare assemblies I was thinking about using one for an AH61 I have. Kat cart has their...
  16. C

    Difference in 212cc & 196cc predator engines

    I have several performance parts for a 212cc predator and would like to know what all the differences are between the 212cc and the 196cc Predator engines. I can buy a 196cc real cheep and would like to know if a flat top piston, non hemi cam, ratio rockers, 26# valve springs, retainers &...
  17. Fisher1983

    3 engines for sale, Briggs, Tecumseh, Honda

    Well, just found out Im short on my bills this month so time to thin the herd. I have a Briggs 3.5hp Industrial Plus shortblock. Needs a hone and rings...it was puffing oil on reassembly. Has a fresh paint job on it. Iron bore, single bearing, 3/4 tapped crank. Selling with old skool 3hp housing...
  18. JohnnyTillotson

    Engines For Sale

    Time to purge. I'll start with the engines. Prices are without shipping. You are welcome to come pick it up or if you need it shipped we'll price that out together. All painted engines with the new decals where running at the time I painted them. All the rest have compression and some spark...
  19. ugmold

    Toro/Tecumseh 2 stroke engines

    I picked up a couple of Toro snowblowers over the weekend on the cheap. They both run. I was thinking about trying to mount one on my 69 Maverick frame at least temporarily (Until I rebuild the original engine) Pics attached show Toros. S-200 and a Snowmaster 20. The S-200 looked like the...
  20. 6doggie3

    Mcculloch engine's

    I picked up a couple tubs of motors and parts last month. i know the one is a west bend 580 But not sure how to check on the Mcculloch's? Thank's
Top