not?

http://www.osengines.com/engines-airplane/osmg1513/index.html

Can anyone identify this bike?

Mattel "V-rroom!" TV Commercial 1960s - YouTube And here is a little demo of mine. :thumbsup: 1964 Mattel Stallion with V-RROOM engine - YouTube

its worth it to buy a Valve Cover Crankcase Breather Filter? and Crank Case Catch Can? for my clone honda stock engine 5.5hp? thank

I've been thinking about the blower housings on these motors that are on mini bikes. Do we really need them? Most the motors we put on these things come off industrial equipment that stays in one spot,so it needs some kind of cooling,,where as a mini is moving,much like an air cooled motorbike...

I'm deciding on whether to put the effort in making a new jackshaft plate and mount to go with this gx390 i've mounted onto this Baja Warrior.. Is it worth it or does the GX390 have enough torque to pull this bike up hills without a jackshaft?? I have the stock rear sprocket for the warrior...

I'm trying to build the trailing arm on the Twister. I was thinking this question might be better on it's own. While shopping on sites. It looks like the quality of minibike bearings are not as good of quality as those for racing go karts. The live axle set up on a racing kart seems to have...

Is this drafting? I say it is. This was a very close race . Shouldn't have been with out the draft.. post comment and your thoughts. Minibike Racing - Lessons in Drafting - YouTube

eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low prices Being a Superflea Nut, this ad caught me completely by surprise. Has anyone heard of this version of the Superflea? Fred

I am currently starting a Roper project with little knowledge of what next. The bike I received for bonus payment on a siding job had been sitting outside for many years so a full restoration was in order. The problem I'm having is what the original color paint was. Upon removing faded red paint...

A friend of mine has this bike. It looks like a modified old Frijole frame? The wheels are 6" steel. What wheels are these, what other bikes did they come on. The bike has an added jackshaft, 3hp briggs, added footpegs, hand drum brake, added extra fuel bottle, added tool box etc..Its pretty...

Our Government is trying to decide if they should release the photo of that poor misunderstood terrorist, with the bullet hole in his head, to the public? Some are worried that releasing the photo would cause outrage in the Muslim community- yeah, like shooting him in the head hasn't outraged...

Tell me what you think? http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=230591257374&viewitem=%20&sspagename=STRK:MEWAX:IT#ht_500wt_1182 What kind of Speedway is it?:stuart:

We were working on the DB30 last weekend and I had the chain and the brake caliper off. I spun the rear wheel by hand (it spun freely) and I noticed that the wheel had a bit of a side-to-side wobble. Sighting down both the sprocket and brake disc I would estimate it to be about 1/8" wobble to...

Little pricey :shrug: on parts for me?? My opinion is I think the seller would be better off selling it as a complete bronc. Someone would probably give ???? $600.00 Had to post I know a few of you guys will pout-n-cry and others will be happy they found the part they was needing...

I have been getting conflicting information. Some are saying when you remove the governor it only gives you 5200-5500 rpm and you do not need to put on the 18 lb valve springs. Others are saying you do. What is the correct answer? And Why? Thanks Randy

Hi everyone...it's me Darin again with the dual Bonanza project. I've had so much positive feedback on my little machines that I've at the very least commited to cleaning them up and seeing if I can bring back at least a little of their beauty....but here's my question... If I disassemble...

Picked this up today. Extra plate welded to the font of the forks and they cut off the engine plate to make the 3hp tec fit.:doah: Looks like the brake guts are gone.:doah:They ground down the right side handle bar to accommodate the brake lever throttle.:doah: Other than that I think it might...

I just picked this Baja up for $50 off Craigslist. It is virtually brand new and appears to have been used for motor parts for a second bike. Carb, pull start, and clutch guard removed. I plan to use it for the 6.5 HP Harbor Frieght motor I purchased last month. Gotta save up some money...

i got a Black Widow with original paint, its quit faded. should i repaint or not?