oil

My Briggs v-twin replacement engine for my riding mower came with an oil pressure switch. I know it is not necessary, but might save my engine some day. How can I connect it so it works? Do I just jumper a hot wire to it or ? Any help is appreciated.

Does anyone know how much oil to put in a hs50 for a black widow Rupp. They were run with dellorto carbs with no governor. Just wondering if I put the hs50 I built on my Rupp how much oil I should put in.

I'm curious to find out weight and brand personally I'm running 0-40 mobil1 on a heavily modified predator and it is beautiful inside of the motor, one would almost think it's a new motor but reality is its over two years old and gets beat down regularly by me and everyone I know thanks in...

I know this is a long shot but would anyone happen to know what the thread size is of the oil filler hole on side covers. Also would anyone happen to have one or know where I could get one. Thanks Rick.

hey, I want to get the strut mount catch can, but I didn't want to install it in the back by the tire... where else can I mount it? I was thinking maybe in front of the engine, or where the rear fender mounts in front of the tire

Not sure if this is where I need to put this, but I thought I would like to share a few pictures of the Rupp fork oil display I made. I purchased a very nice original can on ebay and had my local printer make me up a few labels using the same grade of paper. I then purchased some empty 1 pint...

My engine will just shut off mid ride on my mini bike. Someone told me it was probably the low oil sensor. Can i just disconnect it or do I have to remove it completely?

Trying to finish up my turbo Lifan project. Does anyone have any tips on getting 12v from the stock flywheel to power the oil pump? I read I need a genuine GX160 Honda flywheel to accomplish this. Is this true? Any tips would be great!

Pulled out and rode my CAT with a non-hemi pred the other day. Has maybe 4 hours total run time on it. After a day of sitting, I had nice oil puddle on the floor. Couldn't see where it was coming from. Anybody else have issues with oil leaks on stock engines--could it be the case or seals?

Brand New Old Stock! No more messing around with scratched, chipped, stripped, painted over caps. $10 bucks for two, plus $3 bucks to ship. Paypal only please. I have a "few" of these...

Does the arc billet oil cap threaded 3/4" x 10 fit the predator 212cc non hemi?

What are you guys putting over the hole for the oil sensor when it's removed. I got a engine from a friend and the oil sensor was missing.

Hey guys title says it all. My socks are becoming a little weak and iv been told changing the oil makes a world of difference. What oil should i use and how is it done?? Thanks!!

Predator 212cc filled with Rotella T5 oil for its initial running. I have changed the oil 3 times now within 30 minutes of run time between each. The metal slurry has lessened, but there is still a good amount. I know I shouldn't expect too much from a 95.00$ engine, but is what I'm seeing...

So i really like to reuse things. I like to take things and use them for a different purpose... ive saved all kinds of crap to use for something else, and many times has come out better than anything i could have bought from the store. so I have some stainless steel water bottles ive been...

I went to check me oil, still at the threads, and wiped some on my finger, and I smelled it, it had a slight smell of gas. Is that because these small engines store the oil right under the piston? Or because when I shut it off gas is in the cylinder and goes down in the oil? Don't think it's...

Hopefully a simple question... On my Predator Hemi build, how sensitive is the oil sensor? I've read that it will shut down simply by riding around corners. I've also read it will shut the engine down when doing wheelies? The wheelie thing I can understand, but shutting down while leaning into...

I have a hs 40 with oil leaking pretty bad from the govener shaft dose any one know a easy fix for this thanks Eddie

I was wondering when I have to change the oil in my go kart its in a tight spot, so is there any way I can get rid of the drain plug and attach a tube on it with a small valve? Also when do I change my oil, I will be using it in the winter so before?

I bought a new predator 212cc and put 10w30 Pennzoil ultra synthetic in the engine for the first start, while it was the only oil i had laying around. Anyone if this is going to cause bad wear or what i could do I have only ran the engine twice.