Thanks to OldMiniBikes Warehouse for the help in picking out a header that would work for the mini bike.
I stopped by their store today to try and figure out a header that would fit the coleman bike, the BPHM header with screw in muffler was the closest fit. Though the muffler hit the back area of the...
Just got finished up building my Trike mini bike. I modified a Baja heat into a trike. It has a HF 301cc predator engine with a torque convertor. It has a new pipe and air filter. I made the seat myself through some go kart slicks on the rear axle.
Does anyone know how the bent piece of exhaust pipe is attached to the spark arrestor portion of the Powell exhaust? I assume both Tec and Briggs applications are the same. Unable to find photos detailing the attachment method.
Thanks in advance for any enlightenment.
Nos in original factory paint and never used, cheapest one listed in ebay will run you 33 shipped, can have this one for $28.50 shipped (US only)
1/2" pipe thread, used on mostly 1970-earlier "Small frame" rear exhaust tecs
This is not one of my minithings. I put a Predator 420 on my son's yard tractor because he hated pulling the rope on the 212. {Merry Christmas} We have to choke it to start it even when it is warm, and if we raise the throttle too fast when it's in gear, it stalls. Is there a carb kit or a jet...
Ok so it seems like most or all? Engines used in minibikds are not st any risk of being damaged by running a straight pipe with no muffler. Is this correct? The only risk is that they are noisy? But the small engines pick up a little performance with a straight pipe too? Thanks for any info.
Howdy All,
I was messing around and came up with this die to flatten 1/2" Pipe and 3/4" pipe. I don't use tubing much as I have access to a lot of free pipe that is seamless schedule 80:thumbsup:. 1/2" Pipe is .84" O.D. as compared to 7/8" tubing which is .875 and that's close enough for...
A guy responded to an ad I had on CL looking for mini Bike parts and he asked if I knew what this was and how old, and if I wanted to buy it.
I have no idea what it is . but I might want to buy it if I knew.
Those look like ARCO Handle bars Do you think they are or just bent pipe?
New old stock mufflers 1/2" pipe thread, will thread into your old Tecumseh 4hp and others. Main muffler part is 3" long and 1-3/4" across the main body. 1/2" pipe nipple is 1" long. Has chips in paint from shelf wear.
$45 bucks shipped for three, paypal only please...
I need an expansion chamber pipe for my Rockwell 340.
I'll post a pic of the header pipe but I imagine any vintage 2t performance pipe will work.
Located in Greensboro nc
Thanks
I need an exhaust pipe that may not be doable. I need a 6.5 HP Predator pipe to bend 160-180 degrees. The pipe needs to bend as soon as it leaves the engine and not go out more than 1.5 inches. I would need the flange and at least 6 " of pipe to mount the muffler.
Is this even possible? Who can...
Hi guys i bought a straight pipe from OldMiniBikes for my techumseh hs50. I was wondering if it will damage the engine with just the pipe or should i put a silencer on it.. Thanks
Sent from my iPad using Tapatalk
I bought this pipe for a project, but went a different direction with it.
Pipe is in excellent condition. no dents or bends.
I paid $65 for it. I'll take $50 + $10 for shipping from 37618
Paypal only, you pay the 3% or send it as a gift.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.