pipe

  1. thomas3120

    Looking for Exhaust manifold - straight pipe for my Mitsubishi GT600

    Hello, I decided to remove the stock muffler and make/weld a straight pipe that fits inside the left rear shocks, stays clear of the tire and exits rear left under edge of the rear fender: I know the welds aren't pretty, using an Arc welder w/rods and also still learning. Tough time...
  2. P

    thrush side pipe

    so when I was 16 I has a chevy pickup with thrush side pipes, now I have a 67 gmc pickup and want some pipes again, I bought a pair at a swap, guess what, they are both for same side, I was so excited I didn't notice, sooo, what I need is just the outlet, its aluminum for passenger side, thought...
  3. Ajf

    Bonanza cr500 exhaust pipe

    Looking for a bonanza cr500 chopper exhaust pipe. It's a low pipe for a hodaka. Cash or trade. Thanks.
  4. Not so mini bike

    Rupp exhaust pipe

    Came off of a 71' roadster. Is good shape. Should clean up great. Comes with bracket. $60 shipped to lower 48
  5. Midyrman

    H50 Exhaust Connector Elbow Pipe and Support Bracket.

    Looking for the short elbow pipe that connects the block exhaust port to the long tube chrome exhaust pipe on a BC1400. Should I be looking at my local hardware store? Could also use the 2 piece bracket that supports the chrome exhaust pipe at the rear of the frame.
  6. jeep4me

    Nelson Muffler w/flexible stainless pipe

    Nice old Nelson can muffler with 8" of stainless exhaust pipe and threaded fitting. Looks to be in pretty decent condition. Dimensions are approx. 8" long x 3" diameter. Used on Hilltoppers and some of the smaller Heald trail broncs. Asking $50 plus shipping. PayPal preferred, include the...
  7. dbadgley

    Fox street-scamp/trail/tramp-fx/spoiler oem exhuast pipe & guard

    Thought I would offer this here first before going to eBay. $100 plus shipping. THE HEADER WAS NOT CHROMED SO IT WAS MEDIA BLASTED AND REPAINTED WITH HIGH TEMP BLACK. ALL SCREWS AND THREADS ARE IN GREAT SHAPE (RARE)! THE EXHAUST GUARD WAS CHROME AND JUST CLEANED UP, REPLACEMENT GUARDS ARE...
  8. tippycanoenm

    pipe bender on cl

    looks old but rustic.......wish i had the spare change to put it in my shop
  9. Acolytus

    Custom Exhaust help

    I was wondering where I could get the flange to make a custom exhaust. I have extra pipes laying around, but without the flange, I can't do anything with them. Is there a place where they sell them?
  10. joemotis

    water pipe in place of muffler and it will not unscrew briggs flathead 7 hp

    It is a piece of water pipe 6 inches long and the pipe wrench is starting to collapse it and it will not budge. I thought about welding a lug nut on to the end and using an impact wrench. Anyone else dealt with this?
  11. B

    Motorized Bike with Briggs 3.5hp and TAV2 knockoff - need help

    Hello, I've just finished this bike build. You can see the build thread here: (won't let me post the link to a popular engine kit forum.. username beginner01... weak....) Funny thing is, most times I search on google for an engine/driveline answer, I end up lurking here. :thumbsup...
  12. 5

    Someone need an exhaust pipe ????

    Pretty cool stuff !!! andrei-x | eBay
  13. follow my ROTAX

    Cat 400X steering bolt ?

    On my Cat 400X the pipe where the steering bolt goes thru is worn out causing the bars and wheel to go fore and aft. I took it all apart and did not see any bushing. Is there a replaceable bushing or what can be done to fix my issue ?
  14. 2SlickNick

    Chinese Briggs & Stratton

    I bought this flattie last year for $30. It ran; barely.... Removed governor, Ported and Polished, and added a header pipe. Upon cleaning the stock gas tank, it broke ( the little bowl that the short pickup tube pulls gas out of). I got the idea and plans (from a fellow DIYGK member) to use a...
  15. thejoker

    Fox exhaust pipe

    I'm pretty sure sure it's a fox exhaust pipe. $130 shipped OBO. PayPal only send as a gift or add the %3.
  16. B

    Speedway exhaust pipe/ muffler

    I am in need of a exhaust pipe and muffler for my Speedway Shrike. It has the original Tec motor on it. Thanks
  17. J

    Help with rejetting after upgrade Predator 212 hemi?

    Need a little advice on what to do to get my carb running smooth again? Did the air filter and header pipe knowing it would need a little adjustment but just don't know what is right? I have a .035 jet should I just replace that? Some say the e-tube? not sure would like some input! I was hitting...
  18. thejoker

    curved 5hp briggs pipe

    $30 shipped.
  19. capguncowboy

    So, want to take a stab at it?

    I recently bought a bike. It came today in the mail and this part was inside. I'm not sure what it is, but I'm nearly certain it's not a mini bike part. It's about 22" long from end to end, the straight pipe is about 19-1/4" long and is 1" OD. The end with a fitting is 2" OD and 1-3/4" ID...
  20. 2SlickNick

    Weiner Pipe

    Hey guys, I am needing some help on exhaust pipes. I have been working on my DB 30 trike build for my wife and need an exhaust. My wife wanted the stock muffler because it is quiet. I made a custom TC mounting plate to house my 7" driven and I don't have a lot of clearance from exhaust to...
Top