repair

hi guys I have a 1973 Honda st90 that I am restoring. I need lots of parts this thing needs a engine rebuild and it has no spark I am looking for a repair manual. Thanks for any help

I'm working on finishing the custom fiberglass underseat tank for the "mystery bike". Sunday I flushed it out and let dry , yesterday I caswell'ed the interior and unless I head to north Florida this week to do some "picking" I would like to try and get it prepped for paint. it was not in the...

I'm thinking of starting a "I hate drum brakes" support group. Is it just me or are they a pain in the ass to get them to actually work without a gorilla strength grip? I'm talking about the very common 4" stamped zinc plated style that fits Manco wheels. I have an Arctic Cat with 6" Manco...

I was recently attempting to disassemble the carburetor petcock to repair it,as it was leaking. I was having trouble getting the darn thing apart, because the screws holding the petcock together were stripped out. So I took a dremel with a cutoff wheel and carefully cut slots into each screw for...

I need to setup brake's for two builds one with kidney bean and one with Go power! I got some parts from OldMiniBikes I just wondering what I need to do to modify to fit on the sprocket's

I just picked up and old T-bird. The plastic pet cock is broken off the original plastic tank. Is there any way I can save this tank? Can I replace the pet cock with a brass one and is there any fool proof way of joining the brass to plastic so that I won't be chasing leaks forever? Also if...

tm rebuliding my forks an there. was round white plastic about 3/4 by. 12" long notthick. it just. takes up the play in the forks does anyone have any ir know how can make my own Thanks

Is there a fiberglass repair expert here? I have a large fender, like a Super Bronc size, that has a chunk taken out of the fiberglass. Can a repair be scabbed onto it or can it be repaired, or make a new one using the original as a template? If so, how to make a mold out of the damaged...

I am going to repair my fork set. the stem seemed to have fallen of my front forks. i am going to remove the remaining portion of the stem from the fork set. then add a new piece of chrome moly. my question is .when i put the tubbing in the stem holder is there a angle or slight bend to...

I thought some of you guys may find this to be an interesting read. Scanned from a 1972 issue of MiniCycle (formerly known as Mini Bike Guide) :thumbsup:

I thought some of you guys may find this to be an interesting read. Scanned from a 1972 issue of MiniCycle (formerly known as Mini Bike Guide) :thumbsup:

I thought some of you guys may find this to be an interesting read. Scanned from a 1972 issue of MiniCycle (formerly known as Mini Bike Guide) :thumbsup:

So I bought this neat round aluminum fuel tank the other day at a swap meet. It had a pretty good ding in it but its location would probably put it towards the bars of the frame if it was put behind a seat or something, but it was still pretty noticable. this is the ding, it was sunk in...

What is the best way to get this metal piece off of the schroud, without messing it up?:hammer: I guess this engine came from a snow blower. Thanks

Hello there! I have been on this website for a while but havent really posted much. I was wondering if you knew of a good manual for working on small engines in general. For a mini bike to riding mowers? I am now starting to have more time to tinker with my mini. It needs the carb rebuilt...