spacer

I seem to be missing one when I went to put the sprocket on.They are 2-3/16" long and for a 3/8" bolt. Lmk if you can help....Thanks Rocco.

I recently picked up a Montgomery Ward. I decided to give it a little once over; lube the clutch bushing, check the plug, air filter, and grease the axles. I took off the rear axle buffed it and grease it. Boy was that needed. So, I take off the front axle and realize, there is only a spacer on...

So what can you guys do for me price-wise? I just need to send this spacer to someone and have them replicate it in a perfect circle with perfectly flat surfaces and the same spaced holes. The guy that I dropped it off with is apparently on drugs to want to charge me what he quoted me.:out...

Well here is the 3rd and final piece from the project that never was. Its a manifold spacer with pulse fitting. It is for a GX160, GX200 or Clone..... Description: Manifold Spacer, with Pulse Fitting. Aluminum spacer with pulse fitting can be used either in front or behind carb. Run your fuel...

I NEED TO GET 2 SPROCKET SPACER FOR MANCO 5/6" WHEELS :shrug:PART #41

For those of you running Tilly's, are you using the stock phenolic spacer with the Tilly intake? It almost seems as if you have to, as the mounting studs are too long without it. I modified my phenolic spacer and got as close as I could with port matching it to the intake port. Take a look.

I have 1/2 of an astro wheel and a spacer and brake drum. The inside of the drum is 4 1/4" and the outside of the drum is 4 1/2". I think the wheel is a repro. $30.00 + $8.00 shipping,Postal money order only. Thanks Ed [

i've got a Briggs Animal carb spacer that's been modified to work with a 22mm Mikuni on a 5.5/6.5 clone. $5 shipped. cash only. you can see it in the attached pic. it's not as nice as the AGK one, but if you want cheap this works fine. edit: added another pic.

Here is a shot of my front wheel and fork With wheel centered, From rim to inside of fork, it is 1.75" on both sides of rim My question is this. Speaking from the rim outward do I do : 1 - Spacer, fork, nut on the outside of fork 2 - Spacer, nut, fork, nut on the outside of fork...

I'm looking for a Manco style 6 bolt sprocket spacer, if anyone has one PM me with details... Thanks, Randi

some of you may remember a month or so ago i was talking about fitting a 13x5-6 rear slick on my Cat. since it wouldn't fit on the 3.5" wheel i was running i decided to get a spacer made. after lots of "it will be done in a few days" i finally got it today. it's made out of aluminum and is...

I am looking for a plastic spacer that goes between the rear wheel and sprocket for the speedway that I am working on. Any leads would be appreciated. Thanks.