wide

I am going to order new fenders today and can't get access to the bike. Thanks

Pretty Clean Racing Kart Coyote Wide Track w Briggs Raptor Methanol Engine Mint | eBay

wildcat 500 frame with tank, new tires, new seat, jackshaft assem, tri star wheels. most everything to make it a roller including a 7hp Tec that will need assembled with all new parts.., $700 comes and gets it, no shipping. also have a rebuilt bonanza, mx tank and seat,,painted teal pearl...

Got this here HS motor with a lighting coil. I want to reuse the coil on one of my other HS engine's as this one is siezed but there was no ID tage. The bore is 2 5/8 wide And here are some pics.

Looking for bars from an el burro or similar, approx 15-16" wide and 17-19" tall

If I were to build a fat tire bike around these tires would it even be remotely rideable? Can't get a pic to post. They are Vendetta 26x16-12 with a moderately squared shoulder made for the small amphibious 6x6s and similar. Obviously this bike would be used primarily off road, but I...

I have this seat i would like to sell. It came off one of my arco's but is not original to the bike. Im not sure what this seat is originally from. Not a show piece but a good rider seat. It is 19" long, 5 1/2" wide in the front and 7 1/2" wide in the back, about 3 1/2" high before it kicks up...

I've tried tapered head sex bolt, barrel bolt, binding post, etc., but nothing is coming up. The barrel is 8mm wide and just shy of 1-7/8" (47mm) long.

$20 shipped to anywhere in the lower 48. note the flywheel key is 1/4" wide, must be an older part.

Hey Everyone, I am trying to pick up my 3rd db30 this week. I am considering converting this one to a trike. I saw a few other threads and will be watching those much closer if I do go this route. 1st off I have a 38" axle - is this too wide, too short, or just about right? Is there a...

So looking g through the 6 and 8 inch wheels and I noticed most are max of 3.5" wide. Do I need a 5" wide wheel to support a 5" wide tire? I need a front brake if possible so what are my options for a wide front tire with a brake? For my Trisport any links or info appreciated.

Need a nice front wheel and tire. Offroad. Brake or not. Really looking for atleast a 4" wide tire..... 6-12" wheel. Paypal ready.

I cant figure out what my options are for this wheel. Its a 10" wheel. Diameter is approximately 2 3/8". The front tire is 3" wide and 17" OD Try to match it. Do I need to take another measurment?

I picked these up off of a member a while back but don't recall who or what I paid. The tires are brand new 4.10x3.50-5 Ton Keep. Tubes are new as well. Wheels seem to be about 3-3/4" wide, but I can't tell without removing the tires. OldMiniBikes apparently doesn't sell a 5" wheel in 3-3/4" or...

I saw somebody post a question about Go-Power wheel widths on Bonanzas and it reminded me that I took these pics a while back. While the regular Go Power wheel has equal width halves...the Bonanza Kidney Bean wheels have a shallow half and a deep half...and the alignment key configuration...

I replaced the seat on my Harrison Wildcat and am selling the original one I recently had recovered locally. Still has the original wood. I'd keep it, but I'm putting a GX200 on my Harrison and the original seat covers up the gas cap. So I had to go to a shorter seat. Perfect for a daily...

I have 2 of these motor mounting plates. These were from go-karts but are pretty universal for any real application. About 8" wide and 10" long. $15 each shipped?

10.7 X5.5-6, with Raised White "HOOSIER" letters. Fits wide 6 inch wheel. (It's half an inch to wide for my application, my loss, your gain). $40 shipped U.S. 48 States.

I just put on a new carb and it starts but it runs almost wide open. I noticed that the long rod on left side that you attach the spring and rod to carb from doesn't go all the way back. I can hold it back and it will idle but as soon as I let go it's wide open again. I changed nothing...

Yo Guys, I am kind of stumped on where to find a wide rear tire and rim to go with it. Basically, I need a whole rear tire set up; Rim, tire, sprocket and braking system. I am making a customized mini bike with my son and I am in need of a site if OldMiniBikes doesn't provide. I have looked up...