murray

Well I got a nut cracker :laugh: Picked it up last night , in need of a serious bath but 100% in-tact and unmolested , tires are great , throttle and brake work perfectly , even has the kill switch keys . I'm sure I'll have to fiddle w/carb but thats it , finally a rider that doesn't need a...

I bought a Murray Track 2 on CL for my daughter. Been sitting for awhile so cleaned the carb, new spark plug and got it running and good idle. It seems to be sluggish on take off and takes a bit to get some speed. Maybe it needs a new clutch? I pulled the side cover off and it has a weird...

mini bike parts.wheels,tires,clutch,chain in church-hill tri-cities TN not mine thought i would let everyone know:scooter:

Been working on putting a Predator 212 on my Murray Track 2. Those who have done this know that the exhaust is a pain. I bought the do it yourself kit and another pipe from OldMiniBikes and neither was going to work. I don't have a welder and don't know any welders. CarPlayLB pointed me to...

Just need to know what parts I will need to make the switch. I will be installing it on a Murray Track 2 Minibike, which currently has the stock 3.5hp Tecumseh power sport engine and stock twist throttle. If there are any helpful links out there that will also explain how to go about doing...

I am looking to buy another Murray Track 2 in Georgia. Willing to travel up to 50-60 miles to pick it up. Let me know what you got. I am located in Conyers Ga.

my son wants to trade his murray for an old style doodlebug with a predator or clone. he has had the murray for about 3 or 4 years, mainly ridden in the yard. the handlebar has surface rust. it always starts right up for him. no shipping, may meet somewhere, we are in st.louis, mo. it is dirty...

Murray Track 2 $500.00 OBO (((((( NO SHIPPING )))))) I will be bring this to Windber and will work with your shipper :thumbsup: Don't ask me to box it up and ship it because it wont happen :doah: The Good New wheel bearings 212 Predator Hemi (rejet and air cleaner and header w/muffler)...

Murray Track 2 mini bike. 3.5hp tec runs good. Tires are in great shape. Needs neck bearings. $225 no shipping. Can deliver to winber if paid in full.

Picked up a Murray track 2 off Craigslist for $100 and it runs but has a busted throttle cable and kill switch. I cannot find parts for this thing. I'm in need of the twist throttle handle, new pegs, neck bearings and I wanna ditch the 72th #41 chain sprocket and run a #35 on a 60-66th rear. Can...

I started some spring cleaning today :thumbsup: I had to move the Speedway and the Murray out so I took them for a blast around the yard :thumbsup: and I realized that I am too old, too fat and too tall for these short bars :doah: The ape hangers are goin back on the Speedway and I'm getting a...

3.5 HP Mini Bike

I bought a Murray track 2 last week and rode it most of the week end. Then found that the forks were a little wobbely. Took the nut off at the top and not what I expected. There is a lot of play and that needs to be fixed before I do an engine swap. I tried searching thought the forum for a...

I recently bought a Murray mini bike. With the 3.5. The rear sprocket is rusted. I would like to replace it with a normal #35 tooth sprocket. Were can i find them for a Murray. Thank you

Well after a bad day yesterday driving 2hrs to indiana waiting 4hrs for a guy to show up with a bike to sell me and he didnt for some reason unknown. I was searching on facebook at the online yardsales and came across this murray for 170 bucks. Figured what the heck already has the predator why...

Here are some pics of my Stock Track 2 :

Hey guys - very now to this. I have been thinking about building one for a couple years. Looks like a blast. I have been considering the TAco22 and Bonanza frames. Both look great. Also like the Murray Track 2 frame but can't find one. Am I on a good track or a slave to advertising...

jit's got a pipe on it but ide like something that goes under my seat any shops make a bolt on one?

Hi, I am new to the mini bike world I just bought a used murray track 2 bike off of craigslist yesterday, and it needs a little work I was curious if it would easier to just put a new engine or work on the one that's on it now which is a 3.5 hp Tecumseh. I know it needs a carb rebuild for sure...

Like the title says I need a rear fender for a Murray Track 2