My original Wards Gilson mini from , I believe the late 60s, #35 chains ,Has abrake drum that is so worn that I'm not sure of its exact original diameter. I believe it was 4 1/2". But may be 4 5/8". Wondering if the 4 1/2 " drum from OldMiniBikes warehouse would be a good replacement. They do not give...
Any way to take off/apart the front forks on a 1960s Montgomery wards 424 to replace the springs ... Without cutting the welds. Novice restorer here lol. Thanks for all your help. Pete
For nearly a year I have been collecting parts to restore a Wards 525 that I picked up in Locust Grove, VA. Locust Grove is significant as two major Civil War Battles were fought there in 1863 and 1864. The first, "Chancellorsville," resulted in the mortal wounding of General Stonewall Jackson...
Not positive on the year, but by the label I would say 1974.
This is is nice one in running condition.
The seat is not broken out, but needs a new cover.
295 Kohler with an HR model Tillotson carb. I have an extra rebuild kit for it.
I have been running it on straight gas mixed with no...
Thought I'd start a thread on the trike I got recently.
Although it resembles the "T555" MW trike (ZCQ-13395A) it is not!
This one has a Tecumseh 8HP (HM80) with lighting coil. It appears to have been very well taken care of.
The front fender is undamaged & has the original mudflap. The...
Runs good early 60's 6 hp Briggs w/ Comet 40 series clutch, 30 MPH.
I will sell with or without engine.
Shipping? I am not opposed to the idea of shipping.
I would imagine it's not going to be easy or cheap.
Asking $375 obo plus shipping.
Thanks
Pictures of my Mini Bike, I have got the front forks to work (PB Blaster) engine Briggs & Stratton 3.5 runs OK. Bought a HF 212 and a Max Torque clutch. As you can see the rear suspension is solid, but has swing arm. I think it should have shocks which begs the question what would be the...
Hi all, just finishing up my Mini bike project that I did over the winter. I found a mini bike roller on craigs list back in January after looking for a cheap mini bike for my son. I live near Baltimore so I found a roller all the way down near Salisbury on the eastern shore for $50. I...
I picked up a Wards 555 trike tonight.
It was just a roller.
Put my 7 hp Subaru engine on.
Going to be a fun mini for my Girlfriend. I had no idea they have a differential. I thought it was a live axle.
Montgomery Wards bike 4 hp Tecumseh big block engine no spark. As you can see the forks are bent could be a easy fix if you don't mind not having working springs. Back wheel is not original. I have a clutch , chain and seat that needs covered that will come with the bike. 150.00...
Hi I am new to the site and would like to find some information on a Montgomery Wards Mini-Bike. I purchased the mini at a swap meet with some parts missing if I could get some pictures as to how the rear swing arm attaches to the main frame any help would be appreciated. Thanks for now SCM
Bought this today as the seller was unloading it from his truck. Timing is everything, it wouldn't have lasted long.
Pretty sure it's a Ruttman. It still has the clutch cover/brake assembly. The tires are oversized 530s that will go on a Wards bike, and I'll put the proper size on. Don't think...
Recently picked up a Wards 525 frame to build a rider. There is much previous owner engineering to fix. Having never owned one before my question is, are the legs of the swing arm supposed to be parallel? The one leg is 90 degrees to the shaft, the leg with the brake lever angles away from the...
Selling my gas tank off my Tecumseh HS50. Includes the tank, cap and brackets pictured. No cracks. Selling because I'm switching to a rear mount tank on my Montgomery Wards bike. $30 shipped to the continental US.
I'm looking for the rear mount gas tank from a Gilson/Montgomery Wards bike. I'll take the mounts if you have them or I can make them. I've attached a picture for reference. Should have the cap at one end and output at the other.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.