bend

Hi three West Bends for sale , All are rebuilder or parts engines . The blue 580 is a right hand drive , with aluminum mount . yellow 580 was used on construction equipment mounting base is removable. Black 700 is missing stuffer plate and rod cap. $300 obo for all. Thanks K.C.

what's up my dudes! i am back on this thread. it has been awhile. i have missed my fellow mini bike comrads greatly. I am posting this new thread to see if anyone can help me out. I am looking for a used Savage mini bike with a west bend engine. Let me know what you got. Will pay cash...

I'm in need of an engine mounting bracket/stand for a West Bend 820 motor. Any leads or info on where to get one, would be greatly appreciated.

Wanted...West Bend 610 Mark 412-277-5803

Looking for a trumpet style exhaust header for a West Bend 580 motor. Anyone know where I can find one for a Build Off bike? Thanks.

Hi all, Putting a Sears Roper together and coming to the realization that the steering tube has been bent forwards, reducing the rake. Forks are straight (now) but when I put it all together there appears to be very little rake. The fork hits the steering tube when I turn the bars full left or...

Just as the tile says I am looking for a Dual Carb Intake for a West Bend 700 5 Port Cash or Trade either way ! Thanks

Looking for a clutch for a west bend 580 9/16 shaft size--9 or 10 tooth gear or one i can change gear--thanks.

Not mine but wanted to get the word out there https://southbend.craigslist.org/snw/5905849136.html

Ran into a potential issue while putting a west bend together, I had the late model shroud with the widefoorprint recoil on it previously and decided to retrofit it with the more appropriate shroud. The fairbanks recoil mount holes are larger than the threaded inserts on the shroud, I made some...

Fresh rebuild. No exhaust. Runs great. Add a header and have a great 2 stroke engine. Custom air filter. Clutch and mount. $425 plus shipping Crank is 3/4"

Well hung west bend, it is a 5 port 700 though :devil2: Vintage west bend 5 port 2 cycle boat motor kart chainsaw engine parts | eBay

What's out there. Will the one OldMiniBikes had for the 580 work if I cut the other part down. Is the pto mount pattern the same for a 580 and 610

Don't know much about them but I want one. Would rather it be ready to go and looking good. Let me know what you have.

I purchased a West Bend 580 now I need a motor mount, please let me know if you have one available for sale. Thank you

I'm looking for a complete West Bend 580 engine.

I need some help with my Rokon! The motor will idle, but will not take any throttle. The carb. Has been rebuilt twice but I still suspect it has an internal fuel leak. Any ideas out there?? Thank you!

Its finally finished and this one I can ride......a little at least.... given the neighbors might not enjoy like myself the sounds of the West Bend. Karl (Not So Mini Bike) sold me the BC 500 kit. These kits came from in a box with the frame in primer and a can of red paint. Since I am not a...

I am looking for some torque specs for a west bend 580 need to rebuild mine it has low compression please help!!!

West bend 820 Motor for Go Kart, Mini Bike, or Sno Runner. I have had this for a few years and never used it so it is up for sale. I was told it has a newer redone carb and has protective covers on intake and exhaust openings. $375 plus shipping.