fuel

I'm building a predator 212. I want to run a tillotson carb but i can't decide between Racing fuel or Alchohol. Which fuel is best and size carb would you run? Price doesn't matter in fuel cost. MY SPECS: Predator 212 18cc head milled 0.050 and ported 27/25mm SS valves billet flywheel...

$20.00..............

I have a lil Indian chopper 2 that I am putting together. I have a NOS 3.5 Tecumseh, 1969 that is period correct and when I set it on the frame I do not have room enough to slide it forward with the fuel tank in place, it hits the frame down tubes. I hope that is understandable, now my...

couple of years ago I had made a vented guage gas cap similar to the original ones Bonanza used on the fiberglass tanks. This style cap is NLA, other styles that come close can be found but not with a vent you can close usually. The idea to modify the one I had came from the fact that the...

I have no idea what it is, how to hook it up, and why I get involved with it in the first place? But being a typical OldMiniBikes psychotic, it sure would be fun to learn, and get it going.

Just bought this engine. 6.5 HP (212cc) OHV Horizontal Shaft Gas Engine EPA I took the OG gas tank off so i can put on my old moto skeeter gas tank on my new engine and to my suprise there are 2 fuel lines WTF.I dont have a lot of knowledge of engines, so am wondering what is the second...

Having some issues getting and keeping my Clinton E65 two stroke engine running, long enough for me to get down the driveway. I've cleaned the carb, changed the fuel lines. Fresh gas / oil mix....1/4 pint of sae 30w to a gallon of gas.... per the instructions on the engine. Sometimes the...

I need some type of period correct type fuel tank for my Boonie. I am using 5hp flathead Briggs but it is modified extensively. It does not have a pulsa jet carb. I was thinking maybe a tecky type tank that I can bolt to the head bolts on the front of the engine. Something cheap. Any tank really...

I put a couple upgrades on my Super Bronc this weekend. Bought a nice set of Iron Horse leather saddle bags at the local flea market for $20. They fit the bike nice and mounted to the rear rack really easily. Also, by accident, I came into acquisition of a fuel gauge gas cap that actually...

Something isn't right. I put a new carb on this HM80. It will run if I screw the needles and all the way in but it backfires a bit. If I idle it up it is worse. If I try to back the screw out it starts to die. I think it is running too rich with the needle all the way in. Maybe I got the...

Good Morning OldMiniBikes. I have recently came across the MOTHER LOAD. I am talking barns full of this stuff. 53' trailers filled. Anyone ever see a Mini Valvoline Top Fuel Dragster? Any idea what vintage it might be?

Hi Guys, New to the forum. I just installed a Predator 212 on my race kart with a 15* motor mount. The reason why I went with the 15* mount is because of wheel clearance with the air filter. With the mount and aftermarket filter, I now have the clearance I need. Only thing is I am now...

Hello, There will be a 200 mile endurance run beginning at 8 am Saturday morning (16 May 2015). It begins at the Boles Field Recreational Area in the Sabine National Forest near Shelbyville, Texas on Farm to Market Road 2694. It’s a $30 fee to enter with prizes for the different classes...

Picked up a nice old go-devil but the fuel hose connection broke off the cast fuel valve. Am looking for a good original or a replacement. Anyone got one?

gx440 block 69mm stroke 4.450 rod flat top 92mm piston that's what I got so far.. I need ... cam flywheel head rockers nr racing sells a gx390 head 40 mm intake ? I'm also looking at raceseng 1.8 fly wheel and the 356 cam from nr racing still clueless about rocker...

I was breaking my new motor in with the bike up on a stand and everything was going fine ..... all of a sudden it bogs and dies. I see fuel dumping out of the air filter so i turn it off and cleaned up the spilt gas. Then i started it again without turning the fuel back on. Ran fine until the...

I still have a never used motor that I intended to refit with a slide carb and pipe. So I removed all the throttle linkage and fuel tank so that it would fit into the frame I had. Now all is left is this motor and it needs a new home now. I cam ship this motor with or without the fuel tank your...

I have a 70 RUpp Roadster and I am gong to replace the fuel line and put in a filter . Does anyone know what size fuel line it should have 1/4 or 1/8

My gas caps on on my mini bikes tend to "weep" small amounts of fuel if going over bumps or after an aggressive ride. I assume this has to do with old seals in the cap and venting or lack there of.... Aside from cap replacement, does anyone have any good fixes or repairs they've done to keep...

Where would I be able to find one of these? http://www.oldminibikes.com/forum/attachment.php?attachmentid=71075&d=1427832266