picked it up out of the trash the carb is locked up and the bowl is coated with silicone, theres no tags on the engine. sprayed some starting fluid in the carb plugged in the elictric start and it fired rite up. the engine has an 3/4 shaft tapped and was chain drive with a clutch.
I just picked up a AH-82 2 stroke tec engine. Not sure if anyone has used one on a mini bike project.
It was used for about 20 minutes on a gold mine project. I guess it wasn't what he needed and it was shelved 50 years ago.
It came with an extra flywheel to reverse the rotation.
Thought i...
I had spark and now its gone:out: The bike was really. really rusty and I can't even believe it had spark with all of these acorns in the shroud. I put new carb on and fixed muffler etc. Sprayed starting fluid in the carb and it popped.:thumbsup: Then I finished cleaning the tank, mounted...
when I get some space cleared I want to work on the original 4hp for my 1967 Fox campus. It supposedly runs and all that good stuff but I never tried to fire it up.
when I was cleaning the gunk off the engine I did notice that the mount lugs for the coil are not the same as a later...
if anyone out there knows any thing about these garelli engines please help i need a carb that is for this tx6 or one that someone knows will work plus i guess this has points if they are available id love to know where to get them anyone know???????:hammer:
I just picked this exhaust up cause it was too good of a deal not to, they had it listed as fox and even have it scribbled on the masking tape wrapped around it which I have never seen but I guess it could maybe be pulled off :shrug: Anyway I am pretty sure its for a Speedway but was it specific...
Seems that there is a number of Lil Indian choppers popping up for pretty good prices lately. I have seen about 5 in the last two weeks. Here is a couple...The others sold I guess.
Lil indian outlaw chopper
mini bike
I got a Bonanza MX 1510 and I want to disassemble the 8 inch Bonanza wheel. The bolts look like they are 7/16 but non of my 7/16 sockets will fit in the hole. I have tried every drive and brand of socket I have and nothing works. What the hell!!! Is there a special Bonanza socket I need or what...
hi guys,
normally i'd have never gotten involved in a custom mini bike build.
but a buddy on another forum egged me on a little.
since it is a minibike and i am a member here i guess it's ok to post what i'm doing.
i'm not to well versed in minibikes i've never built one before.
i have...
for example I built an engine using bla bla bla now it makes 20hp!!
.
even the probuilders fib about horse power and when called on it they say all dynos read differently
.
but when you are torquing a bolt a manual will call out a specific torque value and to due this you must use a torque...
Mama and I went to the country fair one town over tonight :thumbsup: Fair food, truck pulls, live bands and fire works :thumbsup: Well while we were there, a snowmobile club was raffling off a new 2013 Polaris 500HO ATV w/trailer :bowdown: so I stop and take a look, and one of the guys running...
I was doing good telling myself I was not bringing anything else home .I got3 project bikes and I wanted to finish them all and be content.Well I sawa roller 3 hours away on C.L. about 7 o'clock last night and said what the hell.Hit the road and was back home at 12:00 pm.Ended up with a nice...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.