i was having this problem a few years ago with my 5hp briggs flathead wher the pull start handle would randomly pop off and the motor shuts off. so i took the flywheel shroud off and put oil in the starter clutch, and thought it was fixed. than i put it away for a wile and now i put a new tilly...
I would like the short handle bar front end that went on the early 60's Dart Cycle that had the larger rear tire and came with a 2 stroke motor. I may take the whole frame also just let me know what you have.
I could use both wheels also and other parts. Thanks Gary M.
PS: Also would like a...
I am thinking about turning this into a Ratbike.
I have other parts for it too but I want to find material to use to make ape hangers for it and to put the seat right on the fender. I need to find a local place to just put the bend in them.
I'm restoring a Go-Devil. The handle bars are 13/16 and all I can find are 7/8. The 7/8 throttle control fits too loose. Got any ideas. If I could find a shim that won't look dorky. No tape. Anyone else have this problem . How did you fix it. John
Hey all, just found these aluminum handlebar mounts w screws at the local bicycle shop for $3.99 each. As you can see, they have a long flat section that can be used as a platform support. Looks like they are for 1" diameter bars, but they could easily be made to fit other diameters...
I am looking for chrome rupp enduro handle bars. My u bolts broke on mine. Figure I Would ask on here before I cut the u bolt off and weld a new one on.
I need the handle bar and fork setup for a taco minibike. I am trying to restore one form the early 70's. The setup I have is bent and forks are frozen solid. pm me.
I have a few good, used sets of handle bar risers/clamps. These are all aluminum and in decent shape. All though, they will need some polishing.
Asking $20/set shipped.
USPS money order or Paypal.
Brake handle broke on my doodlebug tonight. Made stopping a little sketchy, but luckily my size 12s got the job done. Can I just put a handle from a regular mountain bike on there?
If so, does anyone know the diameter of the handle bars?
Hi gang,
I recently picked up a used Azusa minibike and am not happy with the handle bars. They are the type that are straight and they hit my knees when i ride. Has anyone ever bent their handlebars outward? If so, how did you do it? I have seen Azusa handlebars that were already bent...
What's up everyone? Im new to the forum and I recently picked up a DB30.
After I got the bike, I took it all apart and painted it and put a Predator 212 engine in it. Well it runs good and rides, but whenever I take my hands off of the handle bars is shakes like crazy. I tightened the bolt the...
I have the disc brakes set up off of my 69 cat 400x I dont use this type of brake on my bike I know someone can use it..its all there ...50.00..shipped
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.