handle

I’ve been looking all through Craigslist list and Facebook market place for a bit and I can’t find these bars for my bird project. If anyone has these bars please let me know. I’m looking to pay around $50. Only PayPal goods and services. I hope I’m using this section right

Just in from black widow motorsports 68 -69 handle bars , are chain guards ever coming?

In need of handle bar plate and riser for an old hawg ty mini bike. Any help would be greatly appreciated. Thanks y'all

after seeing dave wulfs' simply bad ass ape hangers on his project i had to have a set. i found some 1 inch .062" wall tubing and cut a 26" length. applied some geometry and cut the tube into three pieces. and gas welded them into the beginnings of a set of handlebars. they...

So my predator is pretty much maxxed out(on the excessive side) besides needing a big bore kit( which won't be done) and it is on a 6:1 gear ratio with 15" tires but the clutch gets hot quick. It's a regular $15 clutch. I haven't had a chance to wind out the gear yet but it will still grab...

Looking for a straight set of forks for a bc1000 I would buy suspension ones as well. Badger or no badge is fine. Thank you

Max Torque 3/4", 12 tooth, #35 chain.....$15 Multi disc clutch, 3/4", 15 tooth, #35 chain.....$45 Nelson Muffler (Herters Style), couple small dings.....$75 7/8" Brake handle, accepts large barrel end cables.....$15 Plus shipping on all items. Cash or PayPal as a friend or include the fees...

I'm slowly in the process of refurbishing the 2 MB200s that I bought in September. Things have been going fairly well, but I've run into a problem identifying part numbers for the rubber washers that are attached between the handle bar mounting bracket and the triple T. I assume the rubber is...

Like it says these are brand new chrome plated drag bars and come with aluminum risers . I had bought these for my build off bike but just wasn't feeling it when I tried them . They are 7/8 dia . Price is 40.00 plus shipping

Like it says these are brand new chrome plated drag bars and come with aluminum risers . I had bought these for my build off bike but just wasn't feeling it when I tried them . They are 7/8 dia . Price is 40.00 plus shipping

Here is a Nos brake handle these were used on lil Indian and Taco minibikes. 25.00 shipped

I'm hoping someone out there in OldMiniBikes land has handle bars for a HPE Muskin Cat(the bolt on style) Any help is greatly appreciated! Steve.:thumbsup:

I'm looking for a handle bar for a Sensation mini I'm building. I would like a one piece style with the two clamp/ riser setup, That is the vintage style.

Looking for the handle bar for an MX. I believe the BC 1400-1500 have the same bar. Thanks Tom

I know for a fact it can handle 140psi compression but I am curious just how far can it go without launching the head like a rocket. I replaced the stock head bolts with steel ones from Tractor Supply for extra support.

Hello, I'm having problems with my twist throttle on my Montgomery Ward survivor mini bike. I'm having a issue where I go to use the throttle and it will just slide around the handle bar. I tighten down both on the screws where they will not tighten anymore. The throttle metal housing has just...

Like the title says, I need a set of TX bars :thumbsup: I don't care if the chrome is shot as long as they are straight or almost straight :thumbsup:

I'm looking for the clamps for the handle bars that fit a Ruttman Spyder or Lil Indian mini bike, does anyone know where I can find a set of the OE style clamps?

Looking for a good set of cat handle bars. Let me know what you have. I have parts for trade or cash. Let me know.

Dose anyone know where to buy new high rise handle bars without the center made for a bicycle ?