rod

Just checking with you guys before I order my parts ROD - Im using the stock piston, what size rod should I get VALVES - will the NR stainless 27mm/25mm valves fit in the stock head seats PUSH RODS - is 5.440 the correct length for use with stock rockers Any help will be appreciated

Hi all!! The 212cc stock predator in my MB200 is still running strong! No signs that it will let me down any time soon and I haven't been easy on the bike either. I still have the OEM 6.5hp clone that came with the bike lying around.... Before I order the parts and do the install, I just...

Hey all, Went to a swapmeet and car show today and picked up yet another motor. There were 3 briggs, but I think that this was the best of the 3. I was after a 2hp aswell, as they are rare in my country :laugh: But, it has an 8c 3hp head on it. I'm yet to determine what it actually is by...

i was puttering the afternoon away with an H35 block and an ARC6282 billet connecting rod, the billet rod fits the H35. Slick! it will need some fitting so it passes the cam, the oil dipper will need a hair cut too. this rod is the one for the 5.5hp tecumseh OHV, it also fits the HS50...

I bought this earlier today. I'm trying to post a few pics. The cylinder looks good, no scoring. But the piston doesn't come all the way up. I'm gonna pull the flywheel first but I think the rod might be broken.

So for the past few years me, my family and some friends have been going to rat rods shows and part of the nostalgia of it all is minibikes. We've built full frame bikes and have discovered actual minibikes. Boy what a pleasant disease! At these shows they have ol ' skool flag drop grass...

...So I got this sweet GX 160 from Rocco and I needed to put it on something.Since Jake's Hood Rat lives in my garage it seemed like a likely candidate. The Hood Rat has now become the Hood Hot Rod Rat and I haven't found the top end yet. Thanks Rocco.:thumbsup:

I need a billet rod for my 160. Hopefully for a pretty cheap price. Rod can be used. But not all scratched up and mangled. Thanks.

Been working for a week now and just about done with it . It will hold my Hobert 140 mig and my new Eastwood AC- DC tig welder . Also will hold two bottles, 100 percent argon and the 72-25 for the mig . Still have two finish the cable holders , the flat steel loops on the legs will have 1/4...

Arc rod and good usable. 010 piston. Dyno 073 camshaft. Adult stocker flathead carb. Max bore venturi. Nice carb. Has a methanol jet but can be changed back to a 36-38 for gas. 3 tab head. Good single bearing raptor crank and matching side cover. Both are blue printed together for fit. I'll...

I currently have the 212 predator with the hemi head and I have it modified to run 4500 rpms, keep in mind it still has the stock rod, now when I rode it before I ran about 5 miles usually wide open most of the time. Since my increase in rpms from 3600 to 4500 rpms will the stock rod be safe, I...

Just a heads up for a super deal on eBay. Briggs raptor rod, New, $20 bucks shipped. I ordered one, got it and its a good deal. If I put this in the wrong section sorry, I am not affiliated with the seller, Just thought this was a good deal for the rest of my OldMiniBikes family that might be in the...

about a month ago I bought a stage 2 open modified lifan engine from Nr Racing. 14 cc head billet flywheel, 22 lb springs, bored gx200 carb, cl1 cam, Right off the bat i wasnt happy with NR racing because the intake side didnt even come with lash caps when promsied a stage 2 would. she started...

Robert C's collage he made in 1969 or so from Hot Rod mag photos, for a school project.

I got this off of a fellow member here and Just don't seem to be able to come up with a good I/C block for a fair price so I am offering it for trade. Horstman H beam stroker rod with bearings and a piston and rings for an I/C Motor (I will see if I can get the time this evening to take a rough...

Hello and thanks for checking out my thread. I had been trying to sell a complete Yellow clone motor but not having much luck so I thought I would see if anyone was interested in just the good stuff. I have an ARC billet rod, Honda flat top piston with new Honda rings, stock size SS valves for...

I have a predator 212cc that has a lot of mods to it, I most recently installed a Billet rod. I made sure to follow all of ARC's instructions except for crankshaft polishing. I installed it on my (new to me) racing go kart frame. Whenever I am in low RPM's, the engine shutters and the go kart...

I have a highly modified engine. It has no governor and I need to buy the billet aluminum components (flywheel and rod). For the rod should I get the .020" over or normal one? For the flywheel the ARC one is kinda expensive; how much would it take to convert the normal aluminum flywheel that is...

Finally getting to the bottom of the parts bin I'm trying to clean out. I have a 6.5 clone engine with a ARC billet flywheel, ARC billet rod, and flat top piston. There's no carb, fuel tank, or linkage assembly on it right now, and the governor and oil sensor were removed. The fan shroud and...

early to mid 80s power wheel. i have a intake and chrome carb that goes in place of a hood.